TY  - JOUR
AU  - Salemović, Duško
AU  - Dedić, Aleksandar
AU  - Jovanović, Boško
PY  - 2021
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/1205
AB  - The paper describes the flow of a suspension which is a mixture of two phases: liquid and solid granules. The continuum model with microstructure is introduced, which involves two independent kinematic quantities: the velocity vector and the micro-rotation vector. The physical analogy is based on the movement of the suspension between two coaxial cylinders. The inner cylinder is stationary and the outer one rotates with constant angular velocity. This physical analogy enabled a mathematical model in a form of two coupled differential equations with variable coefficients. The aim of the paper is to present the numerical aspect of the solution for this complex mathematical model. It is assumed that the solid granules are identically oriented and that under the influence of the fluid they move translationally or rotate around the symmetry axis but the direction of their symmetry axes does not change. The solution was obtained by the ordinary finite difference method, and then the corresponding sets of points (nodes) were routed by interpolation graphics.
PB  - Srpsko društvo za mehaniku, Beograd
T2  - Theoretical and Applied Mechanics
T1  - Micropolar fluid between two coaxial cylinders (numerical approach)
IS  - 2
VL  - 48
DO  - 10.2298/TAM210823012S
UR  - conv_1603
ER  - 

@article{
author = "Salemović, Duško and Dedić, Aleksandar and Jovanović, Boško",
year = "2021",
abstract = "The paper describes the flow of a suspension which is a mixture of two phases: liquid and solid granules. The continuum model with microstructure is introduced, which involves two independent kinematic quantities: the velocity vector and the micro-rotation vector. The physical analogy is based on the movement of the suspension between two coaxial cylinders. The inner cylinder is stationary and the outer one rotates with constant angular velocity. This physical analogy enabled a mathematical model in a form of two coupled differential equations with variable coefficients. The aim of the paper is to present the numerical aspect of the solution for this complex mathematical model. It is assumed that the solid granules are identically oriented and that under the influence of the fluid they move translationally or rotate around the symmetry axis but the direction of their symmetry axes does not change. The solution was obtained by the ordinary finite difference method, and then the corresponding sets of points (nodes) were routed by interpolation graphics.",
publisher = "Srpsko društvo za mehaniku, Beograd",
journal = "Theoretical and Applied Mechanics",
title = "Micropolar fluid between two coaxial cylinders (numerical approach)",
number = "2",
volume = "48",
doi = "10.2298/TAM210823012S",
url = "conv_1603"
}

Salemović, D., Dedić, A.,& Jovanović, B.. (2021). Micropolar fluid between two coaxial cylinders (numerical approach). in Theoretical and Applied Mechanics
Srpsko društvo za mehaniku, Beograd., 48(2).
https://doi.org/10.2298/TAM210823012S
conv_1603

Salemović D, Dedić A, Jovanović B. Micropolar fluid between two coaxial cylinders (numerical approach). in Theoretical and Applied Mechanics. 2021;48(2).
doi:10.2298/TAM210823012S
conv_1603 .

Salemović, Duško, Dedić, Aleksandar, Jovanović, Boško, "Micropolar fluid between two coaxial cylinders (numerical approach)" in Theoretical and Applied Mechanics, 48, no. 2 (2021),
https://doi.org/10.2298/TAM210823012S .,
conv_1603 .

TY  - JOUR
AU  - Salemović, Duško
AU  - Dedić, Aleksandar
AU  - Ćuprić, Nenad Lj.
PY  - 2017
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/819
AB  - This paper presents the mathematical model and numerical analysis of the convective drying process of thick slices of colloidal capillary-porous materials slowly moving through conveyor-belt dryer A flow of hot moist air was used as drying agent. The drying process has been analyzed in the form of a 2-D mathematical model, in two directions: along the conveyor and perpendicular on it. The mathematical model consists of two non-linear differential equations and one equation with a transcendent character and it is based on the mathematical model developed for drying process in a form of a 1-D thin layer. The appropriate boundary conditions were introduced The presented model is suitable for the automated control of conveyor-belt dryers. The obtained results with analysis could be useful in predicting the drying kinetics of potato slices and similar natural products.
PB  - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
T2  - Thermal Science
T1  - Two-dimensional mathematical model for simulation of the drying process of thick layers of natural materials in a conveyor-belt dryer
EP  - 1378
IS  - 3
SP  - 1369
VL  - 21
DO  - 10.2298/TSCI160308259S
UR  - conv_1276
ER  - 

@article{
author = "Salemović, Duško and Dedić, Aleksandar and Ćuprić, Nenad Lj.",
year = "2017",
abstract = "This paper presents the mathematical model and numerical analysis of the convective drying process of thick slices of colloidal capillary-porous materials slowly moving through conveyor-belt dryer A flow of hot moist air was used as drying agent. The drying process has been analyzed in the form of a 2-D mathematical model, in two directions: along the conveyor and perpendicular on it. The mathematical model consists of two non-linear differential equations and one equation with a transcendent character and it is based on the mathematical model developed for drying process in a form of a 1-D thin layer. The appropriate boundary conditions were introduced The presented model is suitable for the automated control of conveyor-belt dryers. The obtained results with analysis could be useful in predicting the drying kinetics of potato slices and similar natural products.",
publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd",
journal = "Thermal Science",
title = "Two-dimensional mathematical model for simulation of the drying process of thick layers of natural materials in a conveyor-belt dryer",
pages = "1378-1369",
number = "3",
volume = "21",
doi = "10.2298/TSCI160308259S",
url = "conv_1276"
}

Salemović, D., Dedić, A.,& Ćuprić, N. Lj.. (2017). Two-dimensional mathematical model for simulation of the drying process of thick layers of natural materials in a conveyor-belt dryer. in Thermal Science
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 21(3), 1369-1378.
https://doi.org/10.2298/TSCI160308259S
conv_1276

Salemović D, Dedić A, Ćuprić NL. Two-dimensional mathematical model for simulation of the drying process of thick layers of natural materials in a conveyor-belt dryer. in Thermal Science. 2017;21(3):1369-1378.
doi:10.2298/TSCI160308259S
conv_1276 .

Salemović, Duško, Dedić, Aleksandar, Ćuprić, Nenad Lj., "Two-dimensional mathematical model for simulation of the drying process of thick layers of natural materials in a conveyor-belt dryer" in Thermal Science, 21, no. 3 (2017):1369-1378,
https://doi.org/10.2298/TSCI160308259S .,
conv_1276 .

TY  - JOUR
AU  - Dedić, Aleksandar
AU  - Salemović, Duško
AU  - Jovanović, B.
PY  - 2017
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/809
AB  - U radu je predstavljeno analitičko rešenje matematičkog modela koji opisuje strujanje suspenzije u cilindričnom kanalu. Matematički model je primena teorije mikropolarnog kontinuma i sastoji se od spregnutog sistema diferencijalnih jednačina sa promenljivim koeficijentima. Cilindrični kanal sačinjavaju dva saosna cilindra, od kojih unutrašnji miruje, a spoljašnji rotira konstantnom ugaonom brzinom. Ovakav fizički model omogućava analizu strujanja suspenzije, kao heterogene mešavine tečnosti i čestica koje se nalaze u njoj. Rešenje ovog sistema jednačina pronađeno je u formi specijalnih Beselovih funkcija nultog i prvog reda. Rezultati analitičkog postupka su prikazani grafički za neke konkretne karakteristične vrednost, i pokazano je dobro slaganje rezultata dobijenih analitičkim postupkom sa očekivanim.
AB  - This paper presents an analytical solution of a mathematical model which treats fluid flow suspension in a cylindrical channel. The model is the application of the theory of micropolar continuum on the flow of suspension and it consists of coupled linear differential equations with variable coefficients. The cylindrical channel consists of two cylinders: the internal cylinder was still and the external one rotated with constant velocity. This model enabled us to analyze the motion of a suspension, as heterogeneous mixture of a liquid with solid particles. The solution was found in the form of special Bessel's functions of the zero and the first order. The results were shown on diagrams for some characteristic values, and the good agreement was achieved between the calculated and expected results.
PB  - Univerzitet u Beogradu - Mašinski fakultet, Beograd
T2  - FME Transactions
T1  - Primena teorije mikropolarnog kontinuma na strujanje suspenzije u cilindričnom kanalu
T1  - Application of the theory of micropolar continuum on the flow suspension in a cylindrical channel
EP  - 108
IS  - 1
SP  - 103
VL  - 45
DO  - 10.5937/fmet1701103D
UR  - conv_721
ER  - 

@article{
author = "Dedić, Aleksandar and Salemović, Duško and Jovanović, B.",
year = "2017",
abstract = "U radu je predstavljeno analitičko rešenje matematičkog modela koji opisuje strujanje suspenzije u cilindričnom kanalu. Matematički model je primena teorije mikropolarnog kontinuma i sastoji se od spregnutog sistema diferencijalnih jednačina sa promenljivim koeficijentima. Cilindrični kanal sačinjavaju dva saosna cilindra, od kojih unutrašnji miruje, a spoljašnji rotira konstantnom ugaonom brzinom. Ovakav fizički model omogućava analizu strujanja suspenzije, kao heterogene mešavine tečnosti i čestica koje se nalaze u njoj. Rešenje ovog sistema jednačina pronađeno je u formi specijalnih Beselovih funkcija nultog i prvog reda. Rezultati analitičkog postupka su prikazani grafički za neke konkretne karakteristične vrednost, i pokazano je dobro slaganje rezultata dobijenih analitičkim postupkom sa očekivanim., This paper presents an analytical solution of a mathematical model which treats fluid flow suspension in a cylindrical channel. The model is the application of the theory of micropolar continuum on the flow of suspension and it consists of coupled linear differential equations with variable coefficients. The cylindrical channel consists of two cylinders: the internal cylinder was still and the external one rotated with constant velocity. This model enabled us to analyze the motion of a suspension, as heterogeneous mixture of a liquid with solid particles. The solution was found in the form of special Bessel's functions of the zero and the first order. The results were shown on diagrams for some characteristic values, and the good agreement was achieved between the calculated and expected results.",
publisher = "Univerzitet u Beogradu - Mašinski fakultet, Beograd",
journal = "FME Transactions",
title = "Primena teorije mikropolarnog kontinuma na strujanje suspenzije u cilindričnom kanalu, Application of the theory of micropolar continuum on the flow suspension in a cylindrical channel",
pages = "108-103",
number = "1",
volume = "45",
doi = "10.5937/fmet1701103D",
url = "conv_721"
}

Dedić, A., Salemović, D.,& Jovanović, B.. (2017). Primena teorije mikropolarnog kontinuma na strujanje suspenzije u cilindričnom kanalu. in FME Transactions
Univerzitet u Beogradu - Mašinski fakultet, Beograd., 45(1), 103-108.
https://doi.org/10.5937/fmet1701103D
conv_721

Dedić A, Salemović D, Jovanović B. Primena teorije mikropolarnog kontinuma na strujanje suspenzije u cilindričnom kanalu. in FME Transactions. 2017;45(1):103-108.
doi:10.5937/fmet1701103D
conv_721 .

Dedić, Aleksandar, Salemović, Duško, Jovanović, B., "Primena teorije mikropolarnog kontinuma na strujanje suspenzije u cilindričnom kanalu" in FME Transactions, 45, no. 1 (2017):103-108,
https://doi.org/10.5937/fmet1701103D .,
conv_721 .

TY  - JOUR
AU  - Salemović, Duško
AU  - Dedić, Aleksandar
AU  - Vrakela, Milorad R.
AU  - Halas, Dragan P.
PY  - 2015
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/671
AB  - U radu je dato idejno rešenje uređaja za završno hlađenje čokoladnog preliva jaffa biskvita u A.D. 'Jaffa'- Crvenka. Predloženo idejno rešenje proizašlo je iz željenog tehnološkog procesa završnog hlađenja jaffa biskvita i traženih parametara procesa koje je trebalo ostvariti, i koji su predstavljali sastavni deo projektnog zadatka. Sproveden je termički proračun i pokazano da procentualna greška između površine kontakta vazduha i čokoladnog preliva keksa,koja je dobijena iz toplotnog bilansa i geometrijski preko predloženog idejnog rešenja, ne prelazi 0,67%. Ovim je idejno rešenje sasvim opravdano jer usvajanjem konstruktivno potrebne dužine trakastog transportera dobijamo željenu temperaturu čokoladnog preliva na završetku procesa hlađenja.
AB  - In this paper preliminary design of device for finish cooling chocolate topping of biscuits in A.D. 'Jaffa'- Crvenka was done. The proposed preliminary design followed by the required technological process of finish cooling biscuits and required parameters of process which was supposed to get and which represented part of project task. Thermal analysis was made and obtained percentage error between surface contact of the air and chocolate topping, obtained from heat balance and geometrical over proposed preliminary design, wasn't more than 0.67%. This is a preliminary design completely justified because using required length of belt conveyor receive required temperature of chocolate topping at the end of the cooling process.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika
T1  - Idejno rešenje i termički proračun uređaja za završno hlađenje Jaffa biskvita u a.d. 'Jaffa'- Crvenka
T1  - Preliminary design and thermal analysis of device for finish cooling Jaffa biscuits in a.d. 'Jaffa'- Crvenka
EP  - 470
IS  - 3
SP  - 463
VL  - 70
DO  - 10.5937/tehnika1503463S
UR  - conv_9
ER  - 

@article{
author = "Salemović, Duško and Dedić, Aleksandar and Vrakela, Milorad R. and Halas, Dragan P.",
year = "2015",
abstract = "U radu je dato idejno rešenje uređaja za završno hlađenje čokoladnog preliva jaffa biskvita u A.D. 'Jaffa'- Crvenka. Predloženo idejno rešenje proizašlo je iz željenog tehnološkog procesa završnog hlađenja jaffa biskvita i traženih parametara procesa koje je trebalo ostvariti, i koji su predstavljali sastavni deo projektnog zadatka. Sproveden je termički proračun i pokazano da procentualna greška između površine kontakta vazduha i čokoladnog preliva keksa,koja je dobijena iz toplotnog bilansa i geometrijski preko predloženog idejnog rešenja, ne prelazi 0,67%. Ovim je idejno rešenje sasvim opravdano jer usvajanjem konstruktivno potrebne dužine trakastog transportera dobijamo željenu temperaturu čokoladnog preliva na završetku procesa hlađenja., In this paper preliminary design of device for finish cooling chocolate topping of biscuits in A.D. 'Jaffa'- Crvenka was done. The proposed preliminary design followed by the required technological process of finish cooling biscuits and required parameters of process which was supposed to get and which represented part of project task. Thermal analysis was made and obtained percentage error between surface contact of the air and chocolate topping, obtained from heat balance and geometrical over proposed preliminary design, wasn't more than 0.67%. This is a preliminary design completely justified because using required length of belt conveyor receive required temperature of chocolate topping at the end of the cooling process.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika",
title = "Idejno rešenje i termički proračun uređaja za završno hlađenje Jaffa biskvita u a.d. 'Jaffa'- Crvenka, Preliminary design and thermal analysis of device for finish cooling Jaffa biscuits in a.d. 'Jaffa'- Crvenka",
pages = "470-463",
number = "3",
volume = "70",
doi = "10.5937/tehnika1503463S",
url = "conv_9"
}

Salemović, D., Dedić, A., Vrakela, M. R.,& Halas, D. P.. (2015). Idejno rešenje i termički proračun uređaja za završno hlađenje Jaffa biskvita u a.d. 'Jaffa'- Crvenka. in Tehnika
Savez inženjera i tehničara Srbije, Beograd., 70(3), 463-470.
https://doi.org/10.5937/tehnika1503463S
conv_9

Salemović D, Dedić A, Vrakela MR, Halas DP. Idejno rešenje i termički proračun uređaja za završno hlađenje Jaffa biskvita u a.d. 'Jaffa'- Crvenka. in Tehnika. 2015;70(3):463-470.
doi:10.5937/tehnika1503463S
conv_9 .

Salemović, Duško, Dedić, Aleksandar, Vrakela, Milorad R., Halas, Dragan P., "Idejno rešenje i termički proračun uređaja za završno hlađenje Jaffa biskvita u a.d. 'Jaffa'- Crvenka" in Tehnika, 70, no. 3 (2015):463-470,
https://doi.org/10.5937/tehnika1503463S .,
conv_9 .

TY  - JOUR
AU  - Salemović, Duško
AU  - Dedić, Aleksandar
AU  - Ćuprić, Nenad Lj.
PY  - 2015
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/668
AB  - This paper presents a mathematical model and numerical analysis of the convective drying process of small particles of potatoes slowly moving through the flow of a drying agent - hot moist air. The drying process was analyzed in the form of a one-dimensional thin layer. The mathematical model of the drying process is a system of two ordinary non-linear differential equations with constant coefficients and an equation with a transcendent character. The appropriate boundary conditions of the mathematical model were given. The presented model is suitable in the automated control. The presented system of differential equations was solved numerically. The analysis presented here and the obtained results could be useful in predicting the drying kinetics of potatoes and similar natural products in a conveyor-belt dryer.
PB  - Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd
T2  - Thermal Science
T1  - A mathematical model and simulation of the drying process of thin layers of potatoes in a conveyor-belt dryer
EP  - 1118
IS  - 3
SP  - 1107
VL  - 19
DO  - 10.2298/TSCI130920020S
UR  - conv_927
ER  - 

@article{
author = "Salemović, Duško and Dedić, Aleksandar and Ćuprić, Nenad Lj.",
year = "2015",
abstract = "This paper presents a mathematical model and numerical analysis of the convective drying process of small particles of potatoes slowly moving through the flow of a drying agent - hot moist air. The drying process was analyzed in the form of a one-dimensional thin layer. The mathematical model of the drying process is a system of two ordinary non-linear differential equations with constant coefficients and an equation with a transcendent character. The appropriate boundary conditions of the mathematical model were given. The presented model is suitable in the automated control. The presented system of differential equations was solved numerically. The analysis presented here and the obtained results could be useful in predicting the drying kinetics of potatoes and similar natural products in a conveyor-belt dryer.",
publisher = "Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd",
journal = "Thermal Science",
title = "A mathematical model and simulation of the drying process of thin layers of potatoes in a conveyor-belt dryer",
pages = "1118-1107",
number = "3",
volume = "19",
doi = "10.2298/TSCI130920020S",
url = "conv_927"
}

Salemović, D., Dedić, A.,& Ćuprić, N. Lj.. (2015). A mathematical model and simulation of the drying process of thin layers of potatoes in a conveyor-belt dryer. in Thermal Science
Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd., 19(3), 1107-1118.
https://doi.org/10.2298/TSCI130920020S
conv_927

Salemović D, Dedić A, Ćuprić NL. A mathematical model and simulation of the drying process of thin layers of potatoes in a conveyor-belt dryer. in Thermal Science. 2015;19(3):1107-1118.
doi:10.2298/TSCI130920020S
conv_927 .

Salemović, Duško, Dedić, Aleksandar, Ćuprić, Nenad Lj., "A mathematical model and simulation of the drying process of thin layers of potatoes in a conveyor-belt dryer" in Thermal Science, 19, no. 3 (2015):1107-1118,
https://doi.org/10.2298/TSCI130920020S .,
conv_927 .

TY  - JOUR
AU  - Salemović, Duško
AU  - Dedić, Aleksandar
AU  - Bulić, Bojan Ž.
PY  - 2014
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/590
AB  - U ovom radu dat je proračun strujanja otpadnog vazduha kod primene savremene i moderne metode u procesu prečišćavanja vazduha iz proizvodne hale u kojoj se nalazi elektrolučna peć. Kod ovog proračuna su za postojeću konstrukciju i poznate dimenzije otprašivača izračunati protoci i temperature na različitim mestima cevovoda kompletnog postrojenja za prečišćavanje otpadnih gasova. Inženjerski nadzor i aktivno računarsko upravljanje sa jednog računarskog komadnog mesta podržani su PLCom. Dijagnostificirane su moguće greške i objašnjeni njihovi uzroci i postupci koje treba sprovoditi kada do istih dođe. Takođe, u radu su date i smernice za održavanje i servisiranje opreme za pravilan rad filterskog postrojenja. Tabelarno su prikazane aktivnosti kontrole na postrojenju koje je potrebno sprovoditi u periodičnim vremenskim intervalima.
AB  - In this paper, the power budget is given in the application of contemporary and modern methods in the treatment of air from the production facility in which the electric arc furnace. For this calculation, for existing construction and known dimensions dusters calculate flow rates and temperatures at various points of the complete piping systems for waste gases. The analysis contributes maximum energy utilization, significant financial savings and increase in energy and environmental efficiency. Engineering supervision and active computer control of a computer in pieces of PLC are supported. The possible errors are diagnosed and their causes are explained and the procedures to be followed when it comes to them. Also, the paper gives the guidelines for the maintenance and servicing of equipment for proper operation of the filter plant. The tables presented in the plant control activities to be conducted at periodic intervals.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika
T1  - Proračun postrojenja sa suvim vrećastim filterom TTFP 6/220 u A.D. Livnica 'Kikinda'
T1  - Flow-thermal analysis of power plant with budget dry pocket filter type TTFP 6/220 in foundry AD Kikinda
EP  - 82
IS  - 1
SP  - 76
VL  - 69
DO  - 10.5937/tehnika1401076S
UR  - conv_6
ER  - 

@article{
author = "Salemović, Duško and Dedić, Aleksandar and Bulić, Bojan Ž.",
year = "2014",
abstract = "U ovom radu dat je proračun strujanja otpadnog vazduha kod primene savremene i moderne metode u procesu prečišćavanja vazduha iz proizvodne hale u kojoj se nalazi elektrolučna peć. Kod ovog proračuna su za postojeću konstrukciju i poznate dimenzije otprašivača izračunati protoci i temperature na različitim mestima cevovoda kompletnog postrojenja za prečišćavanje otpadnih gasova. Inženjerski nadzor i aktivno računarsko upravljanje sa jednog računarskog komadnog mesta podržani su PLCom. Dijagnostificirane su moguće greške i objašnjeni njihovi uzroci i postupci koje treba sprovoditi kada do istih dođe. Takođe, u radu su date i smernice za održavanje i servisiranje opreme za pravilan rad filterskog postrojenja. Tabelarno su prikazane aktivnosti kontrole na postrojenju koje je potrebno sprovoditi u periodičnim vremenskim intervalima., In this paper, the power budget is given in the application of contemporary and modern methods in the treatment of air from the production facility in which the electric arc furnace. For this calculation, for existing construction and known dimensions dusters calculate flow rates and temperatures at various points of the complete piping systems for waste gases. The analysis contributes maximum energy utilization, significant financial savings and increase in energy and environmental efficiency. Engineering supervision and active computer control of a computer in pieces of PLC are supported. The possible errors are diagnosed and their causes are explained and the procedures to be followed when it comes to them. Also, the paper gives the guidelines for the maintenance and servicing of equipment for proper operation of the filter plant. The tables presented in the plant control activities to be conducted at periodic intervals.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika",
title = "Proračun postrojenja sa suvim vrećastim filterom TTFP 6/220 u A.D. Livnica 'Kikinda', Flow-thermal analysis of power plant with budget dry pocket filter type TTFP 6/220 in foundry AD Kikinda",
pages = "82-76",
number = "1",
volume = "69",
doi = "10.5937/tehnika1401076S",
url = "conv_6"
}

Salemović, D., Dedić, A.,& Bulić, B. Ž.. (2014). Proračun postrojenja sa suvim vrećastim filterom TTFP 6/220 u A.D. Livnica 'Kikinda'. in Tehnika
Savez inženjera i tehničara Srbije, Beograd., 69(1), 76-82.
https://doi.org/10.5937/tehnika1401076S
conv_6

Salemović D, Dedić A, Bulić BŽ. Proračun postrojenja sa suvim vrećastim filterom TTFP 6/220 u A.D. Livnica 'Kikinda'. in Tehnika. 2014;69(1):76-82.
doi:10.5937/tehnika1401076S
conv_6 .

Salemović, Duško, Dedić, Aleksandar, Bulić, Bojan Ž., "Proračun postrojenja sa suvim vrećastim filterom TTFP 6/220 u A.D. Livnica 'Kikinda'" in Tehnika, 69, no. 1 (2014):76-82,
https://doi.org/10.5937/tehnika1401076S .,
conv_6 .

TY  - JOUR
AU  - Salemović, Duško
AU  - Jovanović, Boško
AU  - Dedić, Aleksandar
PY  - 2009
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/255
AB  - U radu će biti prezentovan numerički aspekt rešenja sistema običnih linearnih diferencijalnih jednačina sa promenljivim koeficijentima, koje opisuju strujanje suspenzije između dva saosna cilindra, od kojih unutrašnji miruje a spoljašnji rotira konstantnom ugaonom brzinom. Rešenje ovih jednačina pronađeno je metodom običnih konačnih razlika, a zatim su kroz odgovarajuće skupove tačaka (čvorove) provučeni interpolacioni grafici.
AB  - In this paper numerical solution of linear differential equations with variable coefficients which treats fluid flow suspension between two coaxial cylinders was presented. The internal cylinder was still and the external one rotated with constant velocity which was very often case in practice, due to better mixing the components. The solution was found in the form of finite differences and for the representative number of nodes the interpolation curves were introduced.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika - Mašinstvo
T1  - Numerički aspekt rešenja diferencijalnih jednačina strujanja suspenzije između dva saosna cilindra
T1  - Numerical solution of differential equations of fluid flow suspension between two coaxial cylinders
EP  - 8
IS  - 4
SP  - 1
VL  - 58
UR  - conv_633
ER  - 

@article{
author = "Salemović, Duško and Jovanović, Boško and Dedić, Aleksandar",
year = "2009",
abstract = "U radu će biti prezentovan numerički aspekt rešenja sistema običnih linearnih diferencijalnih jednačina sa promenljivim koeficijentima, koje opisuju strujanje suspenzije između dva saosna cilindra, od kojih unutrašnji miruje a spoljašnji rotira konstantnom ugaonom brzinom. Rešenje ovih jednačina pronađeno je metodom običnih konačnih razlika, a zatim su kroz odgovarajuće skupove tačaka (čvorove) provučeni interpolacioni grafici., In this paper numerical solution of linear differential equations with variable coefficients which treats fluid flow suspension between two coaxial cylinders was presented. The internal cylinder was still and the external one rotated with constant velocity which was very often case in practice, due to better mixing the components. The solution was found in the form of finite differences and for the representative number of nodes the interpolation curves were introduced.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika - Mašinstvo",
title = "Numerički aspekt rešenja diferencijalnih jednačina strujanja suspenzije između dva saosna cilindra, Numerical solution of differential equations of fluid flow suspension between two coaxial cylinders",
pages = "8-1",
number = "4",
volume = "58",
url = "conv_633"
}

Salemović, D., Jovanović, B.,& Dedić, A.. (2009). Numerički aspekt rešenja diferencijalnih jednačina strujanja suspenzije između dva saosna cilindra. in Tehnika - Mašinstvo
Savez inženjera i tehničara Srbije, Beograd., 58(4), 1-8.
conv_633

Salemović D, Jovanović B, Dedić A. Numerički aspekt rešenja diferencijalnih jednačina strujanja suspenzije između dva saosna cilindra. in Tehnika - Mašinstvo. 2009;58(4):1-8.
conv_633 .

Salemović, Duško, Jovanović, Boško, Dedić, Aleksandar, "Numerički aspekt rešenja diferencijalnih jednačina strujanja suspenzije između dva saosna cilindra" in Tehnika - Mašinstvo, 58, no. 4 (2009):1-8,
conv_633 .

TY  - JOUR
AU  - Jovanović, Boško
AU  - Salemović, Duško
AU  - Dedić, Aleksandar
PY  - 2008
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/252
AB  - U radu će biti prezentovan analitički aspekt rešenja sistema običnih linearnih diferencijalnih jednačina sa promenljivim koeficijentima, koje opisuju strujanje suspenzije između dva saosna cilindra, od kojih unutrašnji miruje, a spoljašnji rotira konstantnom ugaonom brzinom. Ovo je čest slučaj u praksi gde se na ovaj način postiže bolje mešanje i stvaranje homogene suspenzije (smeše). Rešenje ovih jednačina pronađeno je u formi specijalnih Beselovih funkcija nultog i prvog reda. Rezultati analitičkog postupka su prikazani grafički za neke konkretne karakteristične vrednost, i pokazano je dobro slaganje rezultata dobijenih analitičkim postupkom sa očekivanim.
AB  - In this paper analytic solution of linear differential equations with variable coefficients which treats fluid flow suspension between two coaxial cylinders was presented. The internal cylinder was still and the external one rotated with constant velocity which was very often case in practice, due to better mixing the components. The solution was found in the form of special Bessel's functions of zero and first row. The results were shown on diagrams for some characteristic values, and the good agreement was achieved between calculated and expected results.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika - Mašinstvo
T1  - Analitički aspekt rešenja diferencijalnih jednačina strujanja suspenzije između dva saosna cilindra
T1  - Analytic solution of differential equations of fluid flow suspension between two coaxial cylinders
EP  - 7
IS  - 5
SP  - 1
VL  - 57
UR  - conv_632
ER  - 

@article{
author = "Jovanović, Boško and Salemović, Duško and Dedić, Aleksandar",
year = "2008",
abstract = "U radu će biti prezentovan analitički aspekt rešenja sistema običnih linearnih diferencijalnih jednačina sa promenljivim koeficijentima, koje opisuju strujanje suspenzije između dva saosna cilindra, od kojih unutrašnji miruje, a spoljašnji rotira konstantnom ugaonom brzinom. Ovo je čest slučaj u praksi gde se na ovaj način postiže bolje mešanje i stvaranje homogene suspenzije (smeše). Rešenje ovih jednačina pronađeno je u formi specijalnih Beselovih funkcija nultog i prvog reda. Rezultati analitičkog postupka su prikazani grafički za neke konkretne karakteristične vrednost, i pokazano je dobro slaganje rezultata dobijenih analitičkim postupkom sa očekivanim., In this paper analytic solution of linear differential equations with variable coefficients which treats fluid flow suspension between two coaxial cylinders was presented. The internal cylinder was still and the external one rotated with constant velocity which was very often case in practice, due to better mixing the components. The solution was found in the form of special Bessel's functions of zero and first row. The results were shown on diagrams for some characteristic values, and the good agreement was achieved between calculated and expected results.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika - Mašinstvo",
title = "Analitički aspekt rešenja diferencijalnih jednačina strujanja suspenzije između dva saosna cilindra, Analytic solution of differential equations of fluid flow suspension between two coaxial cylinders",
pages = "7-1",
number = "5",
volume = "57",
url = "conv_632"
}

Jovanović, B., Salemović, D.,& Dedić, A.. (2008). Analitički aspekt rešenja diferencijalnih jednačina strujanja suspenzije između dva saosna cilindra. in Tehnika - Mašinstvo
Savez inženjera i tehničara Srbije, Beograd., 57(5), 1-7.
conv_632

Jovanović B, Salemović D, Dedić A. Analitički aspekt rešenja diferencijalnih jednačina strujanja suspenzije između dva saosna cilindra. in Tehnika - Mašinstvo. 2008;57(5):1-7.
conv_632 .

Jovanović, Boško, Salemović, Duško, Dedić, Aleksandar, "Analitički aspekt rešenja diferencijalnih jednačina strujanja suspenzije između dva saosna cilindra" in Tehnika - Mašinstvo, 57, no. 5 (2008):1-7,
conv_632 .