Two measuring methods (direct and indirect) for peripheral milling cutting force, with the aim of machinability examination of the oak wood, are presented in this paper. Extensively research was performed with over 450 measurements of cutting forces and cutting power. Measurements were conducted for different cutting depths, feed rates and cutting tool geometry. Very strong linear dependence between the peripheral cutting forces calculated upon model values of cutting power (F-om*) and peripheral milling force model values (F-om), was established by the means of comparative analysis. Latter is proved by high value of determination coefficient, which amounted to 0,92. Furthermore, it has been proven that there is the same trend for both measuring methods of peripheral forces, taking into consideration that direct method results show average 23% higher values than those gained using indirect method.
26th International Conference on Wood Science and Technology, ICWST 2015: Implementation of Wood Science in Woodworking Sector - Proceedings, 2015, 147-154
TY - CONF
AU - Đurković, Marija
AU - Danon, Gradimir
AU - Svrzić, Srđan
PY - 2015
UR - https://omorika.sfb.bg.ac.rs/handle/123456789/709
AB - Two measuring methods (direct and indirect) for peripheral milling cutting force, with the aim of machinability examination of the oak wood, are presented in this paper. Extensively research was performed with over 450 measurements of cutting forces and cutting power. Measurements were conducted for different cutting depths, feed rates and cutting tool geometry. Very strong linear dependence between the peripheral cutting forces calculated upon model values of cutting power (F-om*) and peripheral milling force model values (F-om), was established by the means of comparative analysis. Latter is proved by high value of determination coefficient, which amounted to 0,92. Furthermore, it has been proven that there is the same trend for both measuring methods of peripheral forces, taking into consideration that direct method results show average 23% higher values than those gained using indirect method.
PB - University of Zagreb - Faculty of Forestry
C3 - 26th International Conference on Wood Science and Technology, ICWST 2015: Implementation of Wood Science in Woodworking Sector - Proceedings
T1 - The Comparative Analysis of Two Methods for Peripheral Milling Cutting Force Measurement of Oak Wood
EP - 154
SP - 147
UR - conv_2086
ER -
@conference{
author = "Đurković, Marija and Danon, Gradimir and Svrzić, Srđan",
year = "2015",
abstract = "Two measuring methods (direct and indirect) for peripheral milling cutting force, with the aim of machinability examination of the oak wood, are presented in this paper. Extensively research was performed with over 450 measurements of cutting forces and cutting power. Measurements were conducted for different cutting depths, feed rates and cutting tool geometry. Very strong linear dependence between the peripheral cutting forces calculated upon model values of cutting power (F-om*) and peripheral milling force model values (F-om), was established by the means of comparative analysis. Latter is proved by high value of determination coefficient, which amounted to 0,92. Furthermore, it has been proven that there is the same trend for both measuring methods of peripheral forces, taking into consideration that direct method results show average 23% higher values than those gained using indirect method.",
publisher = "University of Zagreb - Faculty of Forestry",
journal = "26th International Conference on Wood Science and Technology, ICWST 2015: Implementation of Wood Science in Woodworking Sector - Proceedings",
title = "The Comparative Analysis of Two Methods for Peripheral Milling Cutting Force Measurement of Oak Wood",
pages = "154-147",
url = "conv_2086"
}
Đurković, M., Danon, G.,& Svrzić, S.. (2015). The Comparative Analysis of Two Methods for Peripheral Milling Cutting Force Measurement of Oak Wood. in 26th International Conference on Wood Science and Technology, ICWST 2015: Implementation of Wood Science in Woodworking Sector - Proceedings
University of Zagreb - Faculty of Forestry., 147-154.
conv_2086
Đurković M, Danon G, Svrzić S. The Comparative Analysis of Two Methods for Peripheral Milling Cutting Force Measurement of Oak Wood. in 26th International Conference on Wood Science and Technology, ICWST 2015: Implementation of Wood Science in Woodworking Sector - Proceedings. 2015;:147-154.
conv_2086 .
Đurković, Marija, Danon, Gradimir, Svrzić, Srđan, "The Comparative Analysis of Two Methods for Peripheral Milling Cutting Force Measurement of Oak Wood" in 26th International Conference on Wood Science and Technology, ICWST 2015: Implementation of Wood Science in Woodworking Sector - Proceedings (2015):147-154,
conv_2086 .
