Приказ основних података о документу

The influence of fit on the distribution of glue in oval tenon/mortise joint

dc.creatorDžinčić, Igor
dc.creatorZivanić, Dragan
dc.date.accessioned2024-12-20T12:48:52Z
dc.date.available2024-12-20T12:48:52Z
dc.date.issued2014
dc.identifier.issn1336-4561
dc.identifier.urihttps://omorika.sfb.bg.ac.rs/handle/123456789/593
dc.description.abstractThe analysis of spatial furniture with Finite element method (FEM) provides answers to many engineering problems. One of the fields which is not wholly solved is analysis of glued joints. In order to analyze joints by FEM it is necessary to have access to data on size and type of deformation which occurs as a result of overlap type of fit as well as data on thickness of the glue layer in joint. This paper provides answers to the impact of fit on the distribution of glue in the gluing surface. Test were conducted on oval mortise and tenon joint. The thickness of the glue line was measured on 800 samples. Based on the results the overlap occurred in the majority of samples (over 80 %). Average value of the thickness of the joint zone impregnated by glue amounted to 0.07 mm.en
dc.publisherStatny Drevarsky Vyskumny Ustav
dc.rightsrestrictedAccess
dc.sourceWood Research
dc.subjecttype of fiten
dc.subjectjointsen
dc.subjectFEMen
dc.subjectChairsen
dc.titleThe influence of fit on the distribution of glue in oval tenon/mortise jointen
dc.typearticle
dc.rights.licenseARR
dc.citation.epage302
dc.citation.issue2
dc.citation.other59(2): 297-302
dc.citation.rankM23
dc.citation.spage297
dc.citation.volume59
dc.identifier.rcubconv_2092
dc.identifier.scopus2-s2.0-84903123805
dc.identifier.wos000337934300008
dc.type.versionpublishedVersion


Документи

ДатотекеВеличинаФорматПреглед

Уз овај запис нема датотека.

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу