TY  - JOUR
AU  - Džinčić, Igor
AU  - Palija, Tanja
AU  - Zivanić, Dragan
AU  - Dacić, Vojislav
PY  - 2021
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/1197
AB  - The objective of this study was to investigate the relation of diameter of pilot hole and screw, and machining accuracy on withdrawal strengths of the screws and durability of the dining tables. For this purpose, fasteners and material types on the failure loads of dining table corner joints have been analyzed experimentally and statistically. Double ended thread bolts with different drilling regimes have been used as fastener types. A parallel investigation of rigidity and durability of tables, and withdrawal capacities in accordance with the according to current norms, was performed. According to the results, it is concluded that the diameter of the drilled hole significantly influences the value of the withdrawal strengths of the screws. By analyzing the effect of drilling diameter on the rigidity of tables, a statistically significant difference was determined. As the drilling diameter increases, the rigidity of the examined dining tables decreases.
T2  - Maderas-Ciencia Y Tecnologia
T1  - Determination of the strength performance of table frames
VL  - 23
DO  - 10.4067/s0718-221x2021000100461
UR  - conv_1600
ER  - 

@article{
author = "Džinčić, Igor and Palija, Tanja and Zivanić, Dragan and Dacić, Vojislav",
year = "2021",
abstract = "The objective of this study was to investigate the relation of diameter of pilot hole and screw, and machining accuracy on withdrawal strengths of the screws and durability of the dining tables. For this purpose, fasteners and material types on the failure loads of dining table corner joints have been analyzed experimentally and statistically. Double ended thread bolts with different drilling regimes have been used as fastener types. A parallel investigation of rigidity and durability of tables, and withdrawal capacities in accordance with the according to current norms, was performed. According to the results, it is concluded that the diameter of the drilled hole significantly influences the value of the withdrawal strengths of the screws. By analyzing the effect of drilling diameter on the rigidity of tables, a statistically significant difference was determined. As the drilling diameter increases, the rigidity of the examined dining tables decreases.",
journal = "Maderas-Ciencia Y Tecnologia",
title = "Determination of the strength performance of table frames",
volume = "23",
doi = "10.4067/s0718-221x2021000100461",
url = "conv_1600"
}

Džinčić, I., Palija, T., Zivanić, D.,& Dacić, V.. (2021). Determination of the strength performance of table frames. in Maderas-Ciencia Y Tecnologia, 23.
https://doi.org/10.4067/s0718-221x2021000100461
conv_1600

Džinčić I, Palija T, Zivanić D, Dacić V. Determination of the strength performance of table frames. in Maderas-Ciencia Y Tecnologia. 2021;23.
doi:10.4067/s0718-221x2021000100461
conv_1600 .

Džinčić, Igor, Palija, Tanja, Zivanić, Dragan, Dacić, Vojislav, "Determination of the strength performance of table frames" in Maderas-Ciencia Y Tecnologia, 23 (2021),
https://doi.org/10.4067/s0718-221x2021000100461 .,
conv_1600 .

TY  - JOUR
AU  - Džinčić, Igor
AU  - Zivanić, Dragan
PY  - 2014
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/593
AB  - The analysis of spatial furniture with Finite element method (FEM) provides answers to many engineering problems. One of the fields which is not wholly solved is analysis of glued joints. In order to analyze joints by FEM it is necessary to have access to data on size and type of deformation which occurs as a result of overlap type of fit as well as data on thickness of the glue layer in joint. This paper provides answers to the impact of fit on the distribution of glue in the gluing surface. Test were conducted on oval mortise and tenon joint. The thickness of the glue line was measured on 800 samples. Based on the results the overlap occurred in the majority of samples (over 80 %). Average value of the thickness of the joint zone impregnated by glue amounted to 0.07 mm.
PB  - Statny Drevarsky Vyskumny Ustav
T2  - Wood Research
T1  - The influence of fit on the distribution of glue in oval tenon/mortise joint
EP  - 302
IS  - 2
SP  - 297
VL  - 59
UR  - conv_2092
ER  - 

@article{
author = "Džinčić, Igor and Zivanić, Dragan",
year = "2014",
abstract = "The analysis of spatial furniture with Finite element method (FEM) provides answers to many engineering problems. One of the fields which is not wholly solved is analysis of glued joints. In order to analyze joints by FEM it is necessary to have access to data on size and type of deformation which occurs as a result of overlap type of fit as well as data on thickness of the glue layer in joint. This paper provides answers to the impact of fit on the distribution of glue in the gluing surface. Test were conducted on oval mortise and tenon joint. The thickness of the glue line was measured on 800 samples. Based on the results the overlap occurred in the majority of samples (over 80 %). Average value of the thickness of the joint zone impregnated by glue amounted to 0.07 mm.",
publisher = "Statny Drevarsky Vyskumny Ustav",
journal = "Wood Research",
title = "The influence of fit on the distribution of glue in oval tenon/mortise joint",
pages = "302-297",
number = "2",
volume = "59",
url = "conv_2092"
}

Džinčić, I.,& Zivanić, D.. (2014). The influence of fit on the distribution of glue in oval tenon/mortise joint. in Wood Research
Statny Drevarsky Vyskumny Ustav., 59(2), 297-302.
conv_2092

Džinčić I, Zivanić D. The influence of fit on the distribution of glue in oval tenon/mortise joint. in Wood Research. 2014;59(2):297-302.
conv_2092 .

Džinčić, Igor, Zivanić, Dragan, "The influence of fit on the distribution of glue in oval tenon/mortise joint" in Wood Research, 59, no. 2 (2014):297-302,
conv_2092 .