TY  - JOUR
AU  - Džinčić, Igor
AU  - Skakić, Dušan
PY  - 2012
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/468
AB  - Machinability has been defined, in a general way, as an ability of a certain structural material to be machined by cutting or deformation through common, economical production techniques and technologies. However, a significant disadvantage of this definition is that it does not define the way in which this ability (machinability) is quantified and measured. This research deals with with ways of determining numerical values of parameters of machinability during the process of machining oak wood by longitudinal routing. In order to determine the factors of machinability in the function of tangential cutting force the authors used multifactor orthogonal linear plan of experiment. Analyzing the position of straight lines in the given diagrams and the values of the exponents in the model the following can be concluded: Average tangential cutting force increases with the increase of any of the analyzed factors; With regard to intensity, cutting depth has a greater effect on the cutting force; If the cutting depth increases, the increase of cutting force is faster when feed per edge is greater. If the feed per edge is increased, the increase of tangential cutting force is more significant when the value of cutting depth is greater.
T2  - Wood Research
T1  - Determining the parameters of wood machinabilityas a function of tangential cutting force during the process of machining wood by routing
EP  - 172
IS  - 1
SP  - 161
VL  - 57
UR  - conv_2206
ER  - 

@article{
author = "Džinčić, Igor and Skakić, Dušan",
year = "2012",
abstract = "Machinability has been defined, in a general way, as an ability of a certain structural material to be machined by cutting or deformation through common, economical production techniques and technologies. However, a significant disadvantage of this definition is that it does not define the way in which this ability (machinability) is quantified and measured. This research deals with with ways of determining numerical values of parameters of machinability during the process of machining oak wood by longitudinal routing. In order to determine the factors of machinability in the function of tangential cutting force the authors used multifactor orthogonal linear plan of experiment. Analyzing the position of straight lines in the given diagrams and the values of the exponents in the model the following can be concluded: Average tangential cutting force increases with the increase of any of the analyzed factors; With regard to intensity, cutting depth has a greater effect on the cutting force; If the cutting depth increases, the increase of cutting force is faster when feed per edge is greater. If the feed per edge is increased, the increase of tangential cutting force is more significant when the value of cutting depth is greater.",
journal = "Wood Research",
title = "Determining the parameters of wood machinabilityas a function of tangential cutting force during the process of machining wood by routing",
pages = "172-161",
number = "1",
volume = "57",
url = "conv_2206"
}

Džinčić, I.,& Skakić, D.. (2012). Determining the parameters of wood machinabilityas a function of tangential cutting force during the process of machining wood by routing. in Wood Research, 57(1), 161-172.
conv_2206

Džinčić I, Skakić D. Determining the parameters of wood machinabilityas a function of tangential cutting force during the process of machining wood by routing. in Wood Research. 2012;57(1):161-172.
conv_2206 .

Džinčić, Igor, Skakić, Dušan, "Determining the parameters of wood machinabilityas a function of tangential cutting force during the process of machining wood by routing" in Wood Research, 57, no. 1 (2012):161-172,
conv_2206 .

TY  - JOUR
AU  - Džinčić, Igor
AU  - Skakić, Dušan
PY  - 2012
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/465
AB  - Only a few studies were found in which joints are taken into consideration while analyzing spatial furniture by usage of finite element method. This paper presents results of effects of type of fit on strength of oval tenon-mortise. When calculation are to be made in solid-mechanics, specific input parameters must be defined. In most modern finite element software's Young's modulus of elasticity is one of the basic data. The type of strain, which is result of the fit with splice, has impact on the changes in the Young's modulus of elasticity, which is the basic parameter in the defining of the material of the model. Aim of this study is to define rate of deformation of oval tenon-mortise joint as a result of fitting influence. Type and size of strains which occur in a joint in case of the fit with splice were examined with templates which were set on a joint. Based on this study results, the type of fit has influence on strength of the joints. In the presence of the fit with splice, a permanent change in the dimensions of the plug and hole will occur. During joining of joints with a splice fit, most strains belong to the group of elastic strains, which by all means contributes to the joint strength.
T2  - Wood Research
T1  - Influence of type of fit on strength and deformation of oval tenon-mortise joint
EP  - 477
IS  - 3
SP  - 469
VL  - 57
UR  - conv_2214
ER  - 

@article{
author = "Džinčić, Igor and Skakić, Dušan",
year = "2012",
abstract = "Only a few studies were found in which joints are taken into consideration while analyzing spatial furniture by usage of finite element method. This paper presents results of effects of type of fit on strength of oval tenon-mortise. When calculation are to be made in solid-mechanics, specific input parameters must be defined. In most modern finite element software's Young's modulus of elasticity is one of the basic data. The type of strain, which is result of the fit with splice, has impact on the changes in the Young's modulus of elasticity, which is the basic parameter in the defining of the material of the model. Aim of this study is to define rate of deformation of oval tenon-mortise joint as a result of fitting influence. Type and size of strains which occur in a joint in case of the fit with splice were examined with templates which were set on a joint. Based on this study results, the type of fit has influence on strength of the joints. In the presence of the fit with splice, a permanent change in the dimensions of the plug and hole will occur. During joining of joints with a splice fit, most strains belong to the group of elastic strains, which by all means contributes to the joint strength.",
journal = "Wood Research",
title = "Influence of type of fit on strength and deformation of oval tenon-mortise joint",
pages = "477-469",
number = "3",
volume = "57",
url = "conv_2214"
}

Džinčić, I.,& Skakić, D.. (2012). Influence of type of fit on strength and deformation of oval tenon-mortise joint. in Wood Research, 57(3), 469-477.
conv_2214

Džinčić I, Skakić D. Influence of type of fit on strength and deformation of oval tenon-mortise joint. in Wood Research. 2012;57(3):469-477.
conv_2214 .

Džinčić, Igor, Skakić, Dušan, "Influence of type of fit on strength and deformation of oval tenon-mortise joint" in Wood Research, 57, no. 3 (2012):469-477,
conv_2214 .

TY  - JOUR
AU  - Džinčić, Igor
AU  - Skakić, Dušan
PY  - 2012
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/426
AB  - Machinability has been defined, in a general way, as an ability of a certain structural material to be machined by cutting or deformation through common, economical production techniques and technologies. However, a significant disadvantage of this definition is that it does not define the way in which this ability (machinability) is quantified and measured. This research deals with with ways of determining numerical values of parameters of machinability during the process of machining oak wood by longitudinal routing. In order to determine the factors of machinability in the function of tangential cutting force the authors used multifactor orthogonal linear plan of experiment. Analyzing the position of straight lines in the given diagrams and the values of the exponents in the model the following can be concluded: Average tangential cutting force increases with the increase of any of the analyzed factors; With regard to intensity, cutting depth has a greater effect on the cutting force; If the cutting depth increases, the increase of cutting force is faster when feed per edge is greater. If the feed per edge is increased, the increase of tangential cutting force is more significant when the value of cutting depth is greater.
T2  - Wood Research
T1  - Determining the parameters of wood machinability as a function of tangential cutting force during the process of machining wood by routing
EP  - 171
IS  - 1
SP  - 161
VL  - 57
UR  - conv_1019
ER  - 

@article{
author = "Džinčić, Igor and Skakić, Dušan",
year = "2012",
abstract = "Machinability has been defined, in a general way, as an ability of a certain structural material to be machined by cutting or deformation through common, economical production techniques and technologies. However, a significant disadvantage of this definition is that it does not define the way in which this ability (machinability) is quantified and measured. This research deals with with ways of determining numerical values of parameters of machinability during the process of machining oak wood by longitudinal routing. In order to determine the factors of machinability in the function of tangential cutting force the authors used multifactor orthogonal linear plan of experiment. Analyzing the position of straight lines in the given diagrams and the values of the exponents in the model the following can be concluded: Average tangential cutting force increases with the increase of any of the analyzed factors; With regard to intensity, cutting depth has a greater effect on the cutting force; If the cutting depth increases, the increase of cutting force is faster when feed per edge is greater. If the feed per edge is increased, the increase of tangential cutting force is more significant when the value of cutting depth is greater.",
journal = "Wood Research",
title = "Determining the parameters of wood machinability as a function of tangential cutting force during the process of machining wood by routing",
pages = "171-161",
number = "1",
volume = "57",
url = "conv_1019"
}

Džinčić, I.,& Skakić, D.. (2012). Determining the parameters of wood machinability as a function of tangential cutting force during the process of machining wood by routing. in Wood Research, 57(1), 161-171.
conv_1019

Džinčić I, Skakić D. Determining the parameters of wood machinability as a function of tangential cutting force during the process of machining wood by routing. in Wood Research. 2012;57(1):161-171.
conv_1019 .

Džinčić, Igor, Skakić, Dušan, "Determining the parameters of wood machinability as a function of tangential cutting force during the process of machining wood by routing" in Wood Research, 57, no. 1 (2012):161-171,
conv_1019 .

TY  - JOUR
AU  - Skakić, Dušan
AU  - Džinčić, Igor
PY  - 2009
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/273
AB  - Kvalitet proizvoda predstavlja ključ svake savremeno organizovane proizvodnje. U proizvodnoj praksi neophodno je uspostaviti optimalan odnos između kvaliteta, ekonomičnosti proizvodnje i rokova isporuke. Kvalitet nameštaja se vrednuje u tri nivoa kvaliteta: osnovni kvalitet, visoki kvalitet i posebno visoki kvalitet. Rezultati prikazani u okviru ovog rada su zasnovani na merenju pokazatelja kvaliteta stolica i stolova tokom 2007. i 2008. godine u Zavodu za kontrolu kvaliteta nameštaja.
AB  - The quality of products represents one of the key aims of any modern organized production. In the production practice, it is essential to establish the optimal relationship between quality, production economy and delivery deadlines. Furniture quality is evaluated by three levels and they are: basic quality, high quality and especially high quality. The results presented in this paper are based on the sample measurements of chairs and tables during 2007 and 2008 at the Institute for Furniture Quality Control.
PB  - Univerzitet u Beogradu - Šumarski fakultet, Beograd
T2  - Glasnik Šumarskog fakulteta
T1  - Karakteristike kvaliteta skeletnog nameštaja
T1  - Quality characteristics of spatial furniture
EP  - 145
IS  - 99
SP  - 135
DO  - 10.2298/GSF0999135S
UR  - conv_309
ER  - 

@article{
author = "Skakić, Dušan and Džinčić, Igor",
year = "2009",
abstract = "Kvalitet proizvoda predstavlja ključ svake savremeno organizovane proizvodnje. U proizvodnoj praksi neophodno je uspostaviti optimalan odnos između kvaliteta, ekonomičnosti proizvodnje i rokova isporuke. Kvalitet nameštaja se vrednuje u tri nivoa kvaliteta: osnovni kvalitet, visoki kvalitet i posebno visoki kvalitet. Rezultati prikazani u okviru ovog rada su zasnovani na merenju pokazatelja kvaliteta stolica i stolova tokom 2007. i 2008. godine u Zavodu za kontrolu kvaliteta nameštaja., The quality of products represents one of the key aims of any modern organized production. In the production practice, it is essential to establish the optimal relationship between quality, production economy and delivery deadlines. Furniture quality is evaluated by three levels and they are: basic quality, high quality and especially high quality. The results presented in this paper are based on the sample measurements of chairs and tables during 2007 and 2008 at the Institute for Furniture Quality Control.",
publisher = "Univerzitet u Beogradu - Šumarski fakultet, Beograd",
journal = "Glasnik Šumarskog fakulteta",
title = "Karakteristike kvaliteta skeletnog nameštaja, Quality characteristics of spatial furniture",
pages = "145-135",
number = "99",
doi = "10.2298/GSF0999135S",
url = "conv_309"
}

Skakić, D.,& Džinčić, I.. (2009). Karakteristike kvaliteta skeletnog nameštaja. in Glasnik Šumarskog fakulteta
Univerzitet u Beogradu - Šumarski fakultet, Beograd.(99), 135-145.
https://doi.org/10.2298/GSF0999135S
conv_309

Skakić D, Džinčić I. Karakteristike kvaliteta skeletnog nameštaja. in Glasnik Šumarskog fakulteta. 2009;(99):135-145.
doi:10.2298/GSF0999135S
conv_309 .

Skakić, Dušan, Džinčić, Igor, "Karakteristike kvaliteta skeletnog nameštaja" in Glasnik Šumarskog fakulteta, no. 99 (2009):135-145,
https://doi.org/10.2298/GSF0999135S .,
conv_309 .

TY  - JOUR
AU  - Skakić, Dušan
AU  - Džinčić, Igor
PY  - 2009
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/272
AB  - Rezultati naučnih istraživanja i iskustva iz inženjerske prakse nam ukazuju da definisanje konstrukcije zahteva veliki broj različitih konstruktivnih rešenja. Proces donošenja odluke često zahteva dosta vremena pri čemu ne rezultuje uvek optimalnim rešenjem. Iz ovih razloga se metod numeričke optimizacije koristi u iznalaženju najboljeg rešenja u velikom broju tehničkih nauka. Prvi korak u rešavanju problema pomoću metode konačnih elemenata je definisanje tipa stolice koji će se modelirati i definisanje dimenzija njenih sastavnih elemenata.
AB  - Both the scientific experience and the engineering practice indicate that the decision making processes in the course of solving complex designing problems require an analysis of a great number of different construction variants. These types of decision-making processes are time consuming and do not always result in the selection of an optimal solution. That is why the methods of numerical optimization are applied in a wide range of technical sciences to assist in the selection of the best solution. The first step in solving the problem by using the Finite element method is to determine the type of chair earmarked for modeling, and to determine the dimensions of the chair elements.
PB  - Univerzitet u Beogradu - Šumarski fakultet, Beograd
T2  - Glasnik Šumarskog fakulteta
T1  - Grupisanje i analiza kvaliteta stolica i njihovih osnovnih sastavnih delova
T1  - Grouping and analysis of chair quality and their basic elements
EP  - 154
IS  - 99
SP  - 147
DO  - 10.2298/GSF0999147S
UR  - conv_310
ER  - 

@article{
author = "Skakić, Dušan and Džinčić, Igor",
year = "2009",
abstract = "Rezultati naučnih istraživanja i iskustva iz inženjerske prakse nam ukazuju da definisanje konstrukcije zahteva veliki broj različitih konstruktivnih rešenja. Proces donošenja odluke često zahteva dosta vremena pri čemu ne rezultuje uvek optimalnim rešenjem. Iz ovih razloga se metod numeričke optimizacije koristi u iznalaženju najboljeg rešenja u velikom broju tehničkih nauka. Prvi korak u rešavanju problema pomoću metode konačnih elemenata je definisanje tipa stolice koji će se modelirati i definisanje dimenzija njenih sastavnih elemenata., Both the scientific experience and the engineering practice indicate that the decision making processes in the course of solving complex designing problems require an analysis of a great number of different construction variants. These types of decision-making processes are time consuming and do not always result in the selection of an optimal solution. That is why the methods of numerical optimization are applied in a wide range of technical sciences to assist in the selection of the best solution. The first step in solving the problem by using the Finite element method is to determine the type of chair earmarked for modeling, and to determine the dimensions of the chair elements.",
publisher = "Univerzitet u Beogradu - Šumarski fakultet, Beograd",
journal = "Glasnik Šumarskog fakulteta",
title = "Grupisanje i analiza kvaliteta stolica i njihovih osnovnih sastavnih delova, Grouping and analysis of chair quality and their basic elements",
pages = "154-147",
number = "99",
doi = "10.2298/GSF0999147S",
url = "conv_310"
}

Skakić, D.,& Džinčić, I.. (2009). Grupisanje i analiza kvaliteta stolica i njihovih osnovnih sastavnih delova. in Glasnik Šumarskog fakulteta
Univerzitet u Beogradu - Šumarski fakultet, Beograd.(99), 147-154.
https://doi.org/10.2298/GSF0999147S
conv_310

Skakić D, Džinčić I. Grupisanje i analiza kvaliteta stolica i njihovih osnovnih sastavnih delova. in Glasnik Šumarskog fakulteta. 2009;(99):147-154.
doi:10.2298/GSF0999147S
conv_310 .

Skakić, Dušan, Džinčić, Igor, "Grupisanje i analiza kvaliteta stolica i njihovih osnovnih sastavnih delova" in Glasnik Šumarskog fakulteta, no. 99 (2009):147-154,
https://doi.org/10.2298/GSF0999147S .,
conv_310 .

TY  - JOUR
AU  - Džinčić, Igor
AU  - Skakić, Dušan
AU  - Nestorović, Biserka
PY  - 2008
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/238
AB  - Kroz praksu se pokazalo da je trajnost stolica najvećim delom u funkciji izdržljivosti i izboru elemenata veze za različite konstrukcije stolica. Da bi se moglo vršiti upoređivanje stolica na osnovu izdržljivosti, a zbog različitih vrsta konstrukcije stolica, izvršena je njihova podela na 6 grupa, a prema načinu spajanja u kritičnim tačkama. Na čvrstoću kritičnog spoja utiču površina lepljenja, tačnost izrade, vid naleganja, vrsta i vlažnost drvnog materijala, kvalitet lepka i režimi lepljenja. Istraživanje uticajnih faktora na čvrstoću kritičnog spoja izvršeno je na dve grupe stolica sa sargovima i na dve grupe detalja koji čine kritične spojeve. Prilikom izrade uzoraka za ispitivanje varirani su sledeći uticajni faktori: tačnost izrade, vid naleganja i površina lepljenja.
AB  - Strength and durability of different types of chairs is mostly function of rigidity and type of joints. Classification of chairs was completed upon their critical points. Based on this divide, chairs were classified into six categories. Based on previous research, strength of joints have been influenced by gluing surface, machining quality, type of fit, species and humidity of wood material, glue quality and gluing parameters. Research have been carried out on two groups of chairs, and two groups of joints. Machining quality, type of fit and gluing surface, have been varied during experiment.
PB  - Univerzitet u Beogradu - Šumarski fakultet, Beograd
T2  - Glasnik Šumarskog fakulteta
T1  - Uticajni faktori na čvrstoću i trajnost stolica
T1  - Factors affecting rigidity and durability of chairs
EP  - 275
IS  - 97
SP  - 259
DO  - 10.2298/GSF0897259D
UR  - conv_279
ER  - 

@article{
author = "Džinčić, Igor and Skakić, Dušan and Nestorović, Biserka",
year = "2008",
abstract = "Kroz praksu se pokazalo da je trajnost stolica najvećim delom u funkciji izdržljivosti i izboru elemenata veze za različite konstrukcije stolica. Da bi se moglo vršiti upoređivanje stolica na osnovu izdržljivosti, a zbog različitih vrsta konstrukcije stolica, izvršena je njihova podela na 6 grupa, a prema načinu spajanja u kritičnim tačkama. Na čvrstoću kritičnog spoja utiču površina lepljenja, tačnost izrade, vid naleganja, vrsta i vlažnost drvnog materijala, kvalitet lepka i režimi lepljenja. Istraživanje uticajnih faktora na čvrstoću kritičnog spoja izvršeno je na dve grupe stolica sa sargovima i na dve grupe detalja koji čine kritične spojeve. Prilikom izrade uzoraka za ispitivanje varirani su sledeći uticajni faktori: tačnost izrade, vid naleganja i površina lepljenja., Strength and durability of different types of chairs is mostly function of rigidity and type of joints. Classification of chairs was completed upon their critical points. Based on this divide, chairs were classified into six categories. Based on previous research, strength of joints have been influenced by gluing surface, machining quality, type of fit, species and humidity of wood material, glue quality and gluing parameters. Research have been carried out on two groups of chairs, and two groups of joints. Machining quality, type of fit and gluing surface, have been varied during experiment.",
publisher = "Univerzitet u Beogradu - Šumarski fakultet, Beograd",
journal = "Glasnik Šumarskog fakulteta",
title = "Uticajni faktori na čvrstoću i trajnost stolica, Factors affecting rigidity and durability of chairs",
pages = "275-259",
number = "97",
doi = "10.2298/GSF0897259D",
url = "conv_279"
}

Džinčić, I., Skakić, D.,& Nestorović, B.. (2008). Uticajni faktori na čvrstoću i trajnost stolica. in Glasnik Šumarskog fakulteta
Univerzitet u Beogradu - Šumarski fakultet, Beograd.(97), 259-275.
https://doi.org/10.2298/GSF0897259D
conv_279

Džinčić I, Skakić D, Nestorović B. Uticajni faktori na čvrstoću i trajnost stolica. in Glasnik Šumarskog fakulteta. 2008;(97):259-275.
doi:10.2298/GSF0897259D
conv_279 .

Džinčić, Igor, Skakić, Dušan, Nestorović, Biserka, "Uticajni faktori na čvrstoću i trajnost stolica" in Glasnik Šumarskog fakulteta, no. 97 (2008):259-275,
https://doi.org/10.2298/GSF0897259D .,
conv_279 .

TY  - JOUR
AU  - Skakić, Dušan
AU  - Džinčić, Igor
PY  - 2008
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/245
AB  - U radu su saopšteni rezultati uporednih istraživanja čvrstoće stolica koje su izrađene od drveta Paulownia tomentosa i drveta bukve. Kao predstavnik nameštaja na kome je sprovedeno ispitivanje mogućnosti uvođenja nove vrste za proizvodnju nameštaja u pogone finalne prerade u Srbiji izabrana je stolica. U poređenju sa ostalim tipovima nameštaja statička i dinamička opterećenja kod stolica dostižu najveće vrednosti, tako da su ti pokazatelji bili presudni za odabir komada nameštaja na kome će biti izvršeni ispitivanje. Dobijeni rezultati upućuju na mogućnost korišćenja ove vrste drveta za proizvodnju nameštaja koji u toku eksploatacije nije izložen velikim opterećenjima.
AB  - The result of parallel investigation of chair durability, which has been made in two different wood species (beach and Paulwonia tomentosa) has been presented in this paper. Static and dynamic loads has highest values in seating furniture, and that is the reason why chair has been chosen to bee representative for testing new species, which could be used in furniture production in Serbia. A shown results indicates on possibility that this species can be used only for production furniture which wont bee imposed with heavy loads during exploitation.
PB  - Univerzitet u Beogradu - Šumarski fakultet, Beograd
T2  - Glasnik Šumarskog fakulteta
T1  - Uporedno istraživanje čvrstoće stolica izrađenih od bukovine i Paulownie tomentose
T1  - Comparative investigation of durability of chairs made of beach and Paulownia tomentosa
EP  - 176
IS  - 98
SP  - 167
DO  - 10.2298/GSF0898167S
UR  - conv_288
ER  - 

@article{
author = "Skakić, Dušan and Džinčić, Igor",
year = "2008",
abstract = "U radu su saopšteni rezultati uporednih istraživanja čvrstoće stolica koje su izrađene od drveta Paulownia tomentosa i drveta bukve. Kao predstavnik nameštaja na kome je sprovedeno ispitivanje mogućnosti uvođenja nove vrste za proizvodnju nameštaja u pogone finalne prerade u Srbiji izabrana je stolica. U poređenju sa ostalim tipovima nameštaja statička i dinamička opterećenja kod stolica dostižu najveće vrednosti, tako da su ti pokazatelji bili presudni za odabir komada nameštaja na kome će biti izvršeni ispitivanje. Dobijeni rezultati upućuju na mogućnost korišćenja ove vrste drveta za proizvodnju nameštaja koji u toku eksploatacije nije izložen velikim opterećenjima., The result of parallel investigation of chair durability, which has been made in two different wood species (beach and Paulwonia tomentosa) has been presented in this paper. Static and dynamic loads has highest values in seating furniture, and that is the reason why chair has been chosen to bee representative for testing new species, which could be used in furniture production in Serbia. A shown results indicates on possibility that this species can be used only for production furniture which wont bee imposed with heavy loads during exploitation.",
publisher = "Univerzitet u Beogradu - Šumarski fakultet, Beograd",
journal = "Glasnik Šumarskog fakulteta",
title = "Uporedno istraživanje čvrstoće stolica izrađenih od bukovine i Paulownie tomentose, Comparative investigation of durability of chairs made of beach and Paulownia tomentosa",
pages = "176-167",
number = "98",
doi = "10.2298/GSF0898167S",
url = "conv_288"
}

Skakić, D.,& Džinčić, I.. (2008). Uporedno istraživanje čvrstoće stolica izrađenih od bukovine i Paulownie tomentose. in Glasnik Šumarskog fakulteta
Univerzitet u Beogradu - Šumarski fakultet, Beograd.(98), 167-176.
https://doi.org/10.2298/GSF0898167S
conv_288

Skakić D, Džinčić I. Uporedno istraživanje čvrstoće stolica izrađenih od bukovine i Paulownie tomentose. in Glasnik Šumarskog fakulteta. 2008;(98):167-176.
doi:10.2298/GSF0898167S
conv_288 .

Skakić, Dušan, Džinčić, Igor, "Uporedno istraživanje čvrstoće stolica izrađenih od bukovine i Paulownie tomentose" in Glasnik Šumarskog fakulteta, no. 98 (2008):167-176,
https://doi.org/10.2298/GSF0898167S .,
conv_288 .

TY  - JOUR
AU  - Skakić, Dušan
AU  - Džinčić, Igor
AU  - Nestorović, Biserka
AU  - Palija, Tanja
PY  - 2008
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/236
AB  - Kvalitet proizvoda predstavlja jedan od ključnih ciljeva svake savremeno organizovane proizvodnje, što ga svrstava u grupu osnovnih izlaznih karakteristika proizvodnog procesa. Prema nacionalnom standardu ocena kvaliteta nameštaja se donosi na osnovu ispitivanja karakteristika kvaliteta koje su podeljene u četiri grupe uslova: funkcionalnost (funkcionalne mere i stabilnost), izdržljivost, otpornost površina i kvalitet materijala i tačnost izrade. U ovom radu ispitan je kvalitet trpezarijske stolice pri čemu su korišćeni različiti elementi veze i dati su predlozi za poboljšanje konstrukcije. Dve grupe stolica su izrađene uz pomoć montažno-demontažnih spojeva, dok je jedna grupa uzoraka spajana pomoću stolarskih spojeva uz upotrebu lepka.
AB  - Products quality presents one of the main causes of every contemporary organized production, which includes it, in group of basic exit characteristics. According to national standard, quality mark is based on testing of its quality characteristics. A characteristic of quality has been divided into four groups of demands: functionality (functional dimensions and stability tests), rigidity, surface rigidity, quality of materials and work piece accuracy. Dining chair has been investigated by use of different wood joints, and some remarks on construction has been given. Two groups of investigated chairs has been mounted by use of metal fittings, and one group has been connected with wood dowels by use of PVA wood glue.
PB  - Univerzitet u Beogradu - Šumarski fakultet, Beograd
T2  - Glasnik Šumarskog fakulteta
T1  - Uticaj različitih elemenata veze na kvalitet trpezarijskih stolica
T1  - Influence of different joints on quality of dining chairs
EP  - 247
IS  - 97
SP  - 235
DO  - 10.2298/GSF0897235S
UR  - conv_277
ER  - 

@article{
author = "Skakić, Dušan and Džinčić, Igor and Nestorović, Biserka and Palija, Tanja",
year = "2008",
abstract = "Kvalitet proizvoda predstavlja jedan od ključnih ciljeva svake savremeno organizovane proizvodnje, što ga svrstava u grupu osnovnih izlaznih karakteristika proizvodnog procesa. Prema nacionalnom standardu ocena kvaliteta nameštaja se donosi na osnovu ispitivanja karakteristika kvaliteta koje su podeljene u četiri grupe uslova: funkcionalnost (funkcionalne mere i stabilnost), izdržljivost, otpornost površina i kvalitet materijala i tačnost izrade. U ovom radu ispitan je kvalitet trpezarijske stolice pri čemu su korišćeni različiti elementi veze i dati su predlozi za poboljšanje konstrukcije. Dve grupe stolica su izrađene uz pomoć montažno-demontažnih spojeva, dok je jedna grupa uzoraka spajana pomoću stolarskih spojeva uz upotrebu lepka., Products quality presents one of the main causes of every contemporary organized production, which includes it, in group of basic exit characteristics. According to national standard, quality mark is based on testing of its quality characteristics. A characteristic of quality has been divided into four groups of demands: functionality (functional dimensions and stability tests), rigidity, surface rigidity, quality of materials and work piece accuracy. Dining chair has been investigated by use of different wood joints, and some remarks on construction has been given. Two groups of investigated chairs has been mounted by use of metal fittings, and one group has been connected with wood dowels by use of PVA wood glue.",
publisher = "Univerzitet u Beogradu - Šumarski fakultet, Beograd",
journal = "Glasnik Šumarskog fakulteta",
title = "Uticaj različitih elemenata veze na kvalitet trpezarijskih stolica, Influence of different joints on quality of dining chairs",
pages = "247-235",
number = "97",
doi = "10.2298/GSF0897235S",
url = "conv_277"
}

Skakić, D., Džinčić, I., Nestorović, B.,& Palija, T.. (2008). Uticaj različitih elemenata veze na kvalitet trpezarijskih stolica. in Glasnik Šumarskog fakulteta
Univerzitet u Beogradu - Šumarski fakultet, Beograd.(97), 235-247.
https://doi.org/10.2298/GSF0897235S
conv_277

Skakić D, Džinčić I, Nestorović B, Palija T. Uticaj različitih elemenata veze na kvalitet trpezarijskih stolica. in Glasnik Šumarskog fakulteta. 2008;(97):235-247.
doi:10.2298/GSF0897235S
conv_277 .

Skakić, Dušan, Džinčić, Igor, Nestorović, Biserka, Palija, Tanja, "Uticaj različitih elemenata veze na kvalitet trpezarijskih stolica" in Glasnik Šumarskog fakulteta, no. 97 (2008):235-247,
https://doi.org/10.2298/GSF0897235S .,
conv_277 .