TY  - JOUR
AU  - Palija, Tanja
AU  - Jaić, Milan
AU  - Džinčić, Igor
AU  - Sucur, Aleksandra
AU  - Dobić, Jovan
PY  - 2018
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/950
AB  - This study investigates variation in the dry film thickness (DFT) of a coating applied by roller coater on the surface of wood in real industrial conditions on a UV finishing line. It was examined how DFT is influenced by the temperature of the liquid top coating, the position of the sample on the conveyor, and the position of the measurement point along the length of the sample. The three-way interaction between the temperature of the liquid top coating, position on the conveyor and position along the sample did not have a statistically significant impact on DFT. However, an increase in the temperature of the liquid top coating (from 24.1 to 24.8 degrees C) caused a decrease in the viscosity of the coating and a significant reduction in DFT when samples were positioned closer to the coating supply hose or in the middle of the conveyor. When the temperature of the liquid top coating was lower, the variation in DFT at different positions across the conveyor was not significant. A higher temperature of liquid top coating led to significantly smaller DFT for samples closer to the supply hose and in the middle, compared with those further from the supply hose. It was also found that DFT was greater at the forward end then at the back end of sample.
T2  - Drewno
T1  - Variability of dry film thickness of a coating applied by roller coater on wood in a real industrial process
EP  - 164
IS  - 201
SP  - 153
VL  - 61
DO  - 10.12841/wood.1644-3985.251.13
UR  - conv_1368
ER  - 

@article{
author = "Palija, Tanja and Jaić, Milan and Džinčić, Igor and Sucur, Aleksandra and Dobić, Jovan",
year = "2018",
abstract = "This study investigates variation in the dry film thickness (DFT) of a coating applied by roller coater on the surface of wood in real industrial conditions on a UV finishing line. It was examined how DFT is influenced by the temperature of the liquid top coating, the position of the sample on the conveyor, and the position of the measurement point along the length of the sample. The three-way interaction between the temperature of the liquid top coating, position on the conveyor and position along the sample did not have a statistically significant impact on DFT. However, an increase in the temperature of the liquid top coating (from 24.1 to 24.8 degrees C) caused a decrease in the viscosity of the coating and a significant reduction in DFT when samples were positioned closer to the coating supply hose or in the middle of the conveyor. When the temperature of the liquid top coating was lower, the variation in DFT at different positions across the conveyor was not significant. A higher temperature of liquid top coating led to significantly smaller DFT for samples closer to the supply hose and in the middle, compared with those further from the supply hose. It was also found that DFT was greater at the forward end then at the back end of sample.",
journal = "Drewno",
title = "Variability of dry film thickness of a coating applied by roller coater on wood in a real industrial process",
pages = "164-153",
number = "201",
volume = "61",
doi = "10.12841/wood.1644-3985.251.13",
url = "conv_1368"
}

Palija, T., Jaić, M., Džinčić, I., Sucur, A.,& Dobić, J.. (2018). Variability of dry film thickness of a coating applied by roller coater on wood in a real industrial process. in Drewno, 61(201), 153-164.
https://doi.org/10.12841/wood.1644-3985.251.13
conv_1368

Palija T, Jaić M, Džinčić I, Sucur A, Dobić J. Variability of dry film thickness of a coating applied by roller coater on wood in a real industrial process. in Drewno. 2018;61(201):153-164.
doi:10.12841/wood.1644-3985.251.13
conv_1368 .

Palija, Tanja, Jaić, Milan, Džinčić, Igor, Sucur, Aleksandra, Dobić, Jovan, "Variability of dry film thickness of a coating applied by roller coater on wood in a real industrial process" in Drewno, 61, no. 201 (2018):153-164,
https://doi.org/10.12841/wood.1644-3985.251.13 .,
conv_1368 .

TY  - JOUR
AU  - Jaić, Milan
AU  - Palija, Tanja
PY  - 2015
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/674
AB  - Očvrsnuo film premaza uvek sadrži određene nepravilnosti koje su posledica postupka i uslova nanošenja. Iz tog razloga u cilju postizanja visokog sjaja lakirane površine, uz primenu premaza visokog stepena sjaja neophodno je poliranje lakirane površine tj. brušenje lakirane površine vrlo sitnim brusnim zrnima. U ovom radu ispitano je kako pojedine faze procesa poliranja utiču na hrapavost lakirane površine i stepen sjaja. Hrapavost lakirane površine izražena je parametrima: Ra; Rz i Rt; a sjaj lakirane površine je određen primenom dve geometrije merenja: 20o i 60o.Utvrđeno je da kroz faze poliranja hrapavost lakirane površine opada, a stepen sjaja raste. Visoka vrednost koeficijenta determinacije (R = 0,984) pokazala je da postoji linearna zavisnost između parametra hrapavosti Ra i sjaja lakirane površine (mereno pod uglom od 60o). Primena dve geometrije merenja (20o i 60o) je potvrdila potrebu primene geometrije od 20o kada se određuje sjaj visoko sjajnih površina, jer standardna geometrija od 60˚ ne obezbeđuje sagledavanje malih razlika u stepenu sjaja koje nastaju kao posledica poliranja.
AB  - The cured finishes always contain certain irregularities that result from the technique and conditions of application. For this reason, in order to achieve smooth high gloss finished surfaces, it is necessary to polish ('rub-out') surfaces coated with high gloss finish. Rubbing means sanding the finished surfaces with very fine abrasive grits. In this paper we explored how each phase of the polishing process affect the surface roughness and the gloss of coated surface. The surface roughness was expressed by the parameters: Ra, Rz and Rt, and the gloss was determined by reflectometer (measurement angles 20˚ and 60˚). The results showed that through the stages of polishing, surface roughness decreased, while gloss of finished surface increased. The high value of the coefficient of determination (R2 = 0,984) indicated the linear dependence between the roughness parameter Ra and gloss of finished surface (at measuring angle of 60˚). The comparison of gloss results obtained by two measuring angles, confirmed the need for using the angle of 20˚ when determining the gloss of high gloss surfaces, since universal angle of 60˚ did not provided insight to small differences in the gloss that appeared as a result of polishing.
PB  - Inženjersko društvo za koroziju, Beograd
T2  - Zaštita materijala
T1  - Premazi visokog sjaja - uticaj hrapavosti površine na sjaj
T1  - High gloss finish: The impact of surface roughness on gloss
EP  - 462
IS  - 4
SP  - 457
VL  - 56
DO  - 10.5937/ZasMat1504457J
UR  - conv_58
ER  - 

@article{
author = "Jaić, Milan and Palija, Tanja",
year = "2015",
abstract = "Očvrsnuo film premaza uvek sadrži određene nepravilnosti koje su posledica postupka i uslova nanošenja. Iz tog razloga u cilju postizanja visokog sjaja lakirane površine, uz primenu premaza visokog stepena sjaja neophodno je poliranje lakirane površine tj. brušenje lakirane površine vrlo sitnim brusnim zrnima. U ovom radu ispitano je kako pojedine faze procesa poliranja utiču na hrapavost lakirane površine i stepen sjaja. Hrapavost lakirane površine izražena je parametrima: Ra; Rz i Rt; a sjaj lakirane površine je određen primenom dve geometrije merenja: 20o i 60o.Utvrđeno je da kroz faze poliranja hrapavost lakirane površine opada, a stepen sjaja raste. Visoka vrednost koeficijenta determinacije (R = 0,984) pokazala je da postoji linearna zavisnost između parametra hrapavosti Ra i sjaja lakirane površine (mereno pod uglom od 60o). Primena dve geometrije merenja (20o i 60o) je potvrdila potrebu primene geometrije od 20o kada se određuje sjaj visoko sjajnih površina, jer standardna geometrija od 60˚ ne obezbeđuje sagledavanje malih razlika u stepenu sjaja koje nastaju kao posledica poliranja., The cured finishes always contain certain irregularities that result from the technique and conditions of application. For this reason, in order to achieve smooth high gloss finished surfaces, it is necessary to polish ('rub-out') surfaces coated with high gloss finish. Rubbing means sanding the finished surfaces with very fine abrasive grits. In this paper we explored how each phase of the polishing process affect the surface roughness and the gloss of coated surface. The surface roughness was expressed by the parameters: Ra, Rz and Rt, and the gloss was determined by reflectometer (measurement angles 20˚ and 60˚). The results showed that through the stages of polishing, surface roughness decreased, while gloss of finished surface increased. The high value of the coefficient of determination (R2 = 0,984) indicated the linear dependence between the roughness parameter Ra and gloss of finished surface (at measuring angle of 60˚). The comparison of gloss results obtained by two measuring angles, confirmed the need for using the angle of 20˚ when determining the gloss of high gloss surfaces, since universal angle of 60˚ did not provided insight to small differences in the gloss that appeared as a result of polishing.",
publisher = "Inženjersko društvo za koroziju, Beograd",
journal = "Zaštita materijala",
title = "Premazi visokog sjaja - uticaj hrapavosti površine na sjaj, High gloss finish: The impact of surface roughness on gloss",
pages = "462-457",
number = "4",
volume = "56",
doi = "10.5937/ZasMat1504457J",
url = "conv_58"
}

Jaić, M.,& Palija, T.. (2015). Premazi visokog sjaja - uticaj hrapavosti površine na sjaj. in Zaštita materijala
Inženjersko društvo za koroziju, Beograd., 56(4), 457-462.
https://doi.org/10.5937/ZasMat1504457J
conv_58

Jaić M, Palija T. Premazi visokog sjaja - uticaj hrapavosti površine na sjaj. in Zaštita materijala. 2015;56(4):457-462.
doi:10.5937/ZasMat1504457J
conv_58 .

Jaić, Milan, Palija, Tanja, "Premazi visokog sjaja - uticaj hrapavosti površine na sjaj" in Zaštita materijala, 56, no. 4 (2015):457-462,
https://doi.org/10.5937/ZasMat1504457J .,
conv_58 .

TY  - JOUR
AU  - Jaić, Milan
AU  - Palija, Tanja
AU  - Đorđević, Milan
PY  - 2014
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/607
AB  - Cilj ovoga rada je bio utvrđivanje optimalnog sistema pripreme podloge bukovog drveta (Fagus Silvatica L.) u cilju postizanja viših vrednosti adhezije pojedinih vrsta premaza. Rezultati ispitivanja su pokazali da se obradom drveta brušenjem dobijaju niže vrednosti parametara hrapavosti u površinskom sloju u odnosu obradu drveta glodanjem. Smanjivanje hrapavosti podloge u površinskom sloju rezultovalo je porastom adhezije 2K akril - izocijanatog premaza. Kada je lakiranje vršeno primenom 1K vodorazredivog premaza, više vrednosti adhezije su zabeležene na površinama sa većom hrapavosti podloge. Direktna veza između hrapavosti podloge i adhezije 2K poliuretanskog premaza nije pronađena. Mehanizam adhezije između 1K vodorazredivog premaza i podloge drveta je prvenstveno zasnovan na mehaničkom vezivanju, dok je adhezija 2K akril - izocijanatog premaza i drveta zasnovana na drugim mehanizmima vezivanja.
AB  - In order to achieve an enhancement of adhesion of specific type of coating to the surface of beech wood (Fagus Sylvatica L.), the optimum substrate preparation system was determined regarding the specific coating formulation. The results showed that lower values of surface roughness parameters can be obtained by the sanding process than by the planning process. These lower values of surface roughness enable higher adhesion of a 2K acrylic-isocyanate coating. In cases where coating is performed with a 1K waterborne coating, higher values of adhesion were observed on the surfaces with higher surface roughness. Direct correlation between surface roughness and adhesion of a 2K polyurethane coating was not found. The adhesion between a 1K waterborne coating and the wood substrate is primarily based on a mechanical bonding (entanglement), while the adhesion of a 2K acrylic-isocyanate coating is primarily based on the other bonding mechanisms.
PB  - Inženjersko društvo za koroziju, Beograd
T2  - Zaštita materijala
T1  - Uticaj postupka pripreme površine drveta na adheziju određenih vrsta premaza
T1  - The impact of surface preparation of wood on the adhesion of certain types of coatings
EP  - 169
IS  - 2
SP  - 163
VL  - 55
DO  - 10.5937/ZasMat1402163J
UR  - conv_57
ER  - 

@article{
author = "Jaić, Milan and Palija, Tanja and Đorđević, Milan",
year = "2014",
abstract = "Cilj ovoga rada je bio utvrđivanje optimalnog sistema pripreme podloge bukovog drveta (Fagus Silvatica L.) u cilju postizanja viših vrednosti adhezije pojedinih vrsta premaza. Rezultati ispitivanja su pokazali da se obradom drveta brušenjem dobijaju niže vrednosti parametara hrapavosti u površinskom sloju u odnosu obradu drveta glodanjem. Smanjivanje hrapavosti podloge u površinskom sloju rezultovalo je porastom adhezije 2K akril - izocijanatog premaza. Kada je lakiranje vršeno primenom 1K vodorazredivog premaza, više vrednosti adhezije su zabeležene na površinama sa većom hrapavosti podloge. Direktna veza između hrapavosti podloge i adhezije 2K poliuretanskog premaza nije pronađena. Mehanizam adhezije između 1K vodorazredivog premaza i podloge drveta je prvenstveno zasnovan na mehaničkom vezivanju, dok je adhezija 2K akril - izocijanatog premaza i drveta zasnovana na drugim mehanizmima vezivanja., In order to achieve an enhancement of adhesion of specific type of coating to the surface of beech wood (Fagus Sylvatica L.), the optimum substrate preparation system was determined regarding the specific coating formulation. The results showed that lower values of surface roughness parameters can be obtained by the sanding process than by the planning process. These lower values of surface roughness enable higher adhesion of a 2K acrylic-isocyanate coating. In cases where coating is performed with a 1K waterborne coating, higher values of adhesion were observed on the surfaces with higher surface roughness. Direct correlation between surface roughness and adhesion of a 2K polyurethane coating was not found. The adhesion between a 1K waterborne coating and the wood substrate is primarily based on a mechanical bonding (entanglement), while the adhesion of a 2K acrylic-isocyanate coating is primarily based on the other bonding mechanisms.",
publisher = "Inženjersko društvo za koroziju, Beograd",
journal = "Zaštita materijala",
title = "Uticaj postupka pripreme površine drveta na adheziju određenih vrsta premaza, The impact of surface preparation of wood on the adhesion of certain types of coatings",
pages = "169-163",
number = "2",
volume = "55",
doi = "10.5937/ZasMat1402163J",
url = "conv_57"
}

Jaić, M., Palija, T.,& Đorđević, M.. (2014). Uticaj postupka pripreme površine drveta na adheziju određenih vrsta premaza. in Zaštita materijala
Inženjersko društvo za koroziju, Beograd., 55(2), 163-169.
https://doi.org/10.5937/ZasMat1402163J
conv_57

Jaić M, Palija T, Đorđević M. Uticaj postupka pripreme površine drveta na adheziju određenih vrsta premaza. in Zaštita materijala. 2014;55(2):163-169.
doi:10.5937/ZasMat1402163J
conv_57 .

Jaić, Milan, Palija, Tanja, Đorđević, Milan, "Uticaj postupka pripreme površine drveta na adheziju određenih vrsta premaza" in Zaštita materijala, 55, no. 2 (2014):163-169,
https://doi.org/10.5937/ZasMat1402163J .,
conv_57 .

TY  - JOUR
AU  - Palija, Tanja
AU  - Dobić, Jovan
AU  - Jaić, Milan
PY  - 2013
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/537
AB  - The possibility of photochemical improvement of color stability by UV-irradiation treatment at coating-wood biointerfaces was investigated. The surface of beech wood was partially delignified by exposure to UV-irradiation by passing of samples under UV lamps: a mercury (Hg) lamp with a peak wavelength of 366 nm, a gallium (Ga) lamp with peak wavelengths at 410 and 420 nm and a combination of a mercury and a gallium (Hg + Ga) lamp. After UV-irradiation, the samples were coated with a UV-curable acrylic coating. The number of passes under the lamps was varied to determine the optimum combination of the number of passes and the lamp type that produces the smallest change in color of the coated wood in an indoor environment. The coated samples that had been UV-irradiated by passing 15 times under both an Hg lamp and a Ga lamp showed the smallest change in color (decrease in the Delta E by 23.23% compared to the untreated coated samples) after 72 h of accelerated artificial sunlight exposure. Microscope images of the same samples showed deformation of the cells in wood surface layer and a roughening of the "wood-coating line", which could be related to a partial removal of lignin. These findings suggest that delignification of wood leads to more photo-stable polymer-wood interfaces in terms of color.
T2  - Colloids and Surfaces B-Biointerfaces
T1  - A photochemical method for improvement of color stability at polymer-wood biointerfaces
EP  - 157
SP  - 152
VL  - 108
DO  - 10.1016/j.colsurfb.2013.02.045
UR  - conv_1079
ER  - 

@article{
author = "Palija, Tanja and Dobić, Jovan and Jaić, Milan",
year = "2013",
abstract = "The possibility of photochemical improvement of color stability by UV-irradiation treatment at coating-wood biointerfaces was investigated. The surface of beech wood was partially delignified by exposure to UV-irradiation by passing of samples under UV lamps: a mercury (Hg) lamp with a peak wavelength of 366 nm, a gallium (Ga) lamp with peak wavelengths at 410 and 420 nm and a combination of a mercury and a gallium (Hg + Ga) lamp. After UV-irradiation, the samples were coated with a UV-curable acrylic coating. The number of passes under the lamps was varied to determine the optimum combination of the number of passes and the lamp type that produces the smallest change in color of the coated wood in an indoor environment. The coated samples that had been UV-irradiated by passing 15 times under both an Hg lamp and a Ga lamp showed the smallest change in color (decrease in the Delta E by 23.23% compared to the untreated coated samples) after 72 h of accelerated artificial sunlight exposure. Microscope images of the same samples showed deformation of the cells in wood surface layer and a roughening of the "wood-coating line", which could be related to a partial removal of lignin. These findings suggest that delignification of wood leads to more photo-stable polymer-wood interfaces in terms of color.",
journal = "Colloids and Surfaces B-Biointerfaces",
title = "A photochemical method for improvement of color stability at polymer-wood biointerfaces",
pages = "157-152",
volume = "108",
doi = "10.1016/j.colsurfb.2013.02.045",
url = "conv_1079"
}

Palija, T., Dobić, J.,& Jaić, M.. (2013). A photochemical method for improvement of color stability at polymer-wood biointerfaces. in Colloids and Surfaces B-Biointerfaces, 108, 152-157.
https://doi.org/10.1016/j.colsurfb.2013.02.045
conv_1079

Palija T, Dobić J, Jaić M. A photochemical method for improvement of color stability at polymer-wood biointerfaces. in Colloids and Surfaces B-Biointerfaces. 2013;108:152-157.
doi:10.1016/j.colsurfb.2013.02.045
conv_1079 .

Palija, Tanja, Dobić, Jovan, Jaić, Milan, "A photochemical method for improvement of color stability at polymer-wood biointerfaces" in Colloids and Surfaces B-Biointerfaces, 108 (2013):152-157,
https://doi.org/10.1016/j.colsurfb.2013.02.045 .,
conv_1079 .

TY  - JOUR
AU  - Palija, Tanja
AU  - Jaić, Dejan
AU  - Jaić, Milan
PY  - 2013
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/552
AB  - U radu je ispitan uticaj bajcovanja drveta trešnje (Prunus avium L.) na vrednosti adhezije tri najčešće korišćene vrste premaza u drvnoj industriji: nitroceluloznog (NC), poliuretanskog (PU) i vodorazredivog (WB) premaza. Bajcovanje je vršeno korišćenjem dve vrste bajca: vodenog i nitro bajca. Bajcovanje drveta trešnje dovelo je do porasta hrapavosti, izraženo preko parametra Ra, za 49,1 % kada je površina tretirana vodenim bajcem, odnosno za 5,1 % kada je površina tretirana nitro bajcem. Vrednost adhezije premaza na površini drveta je merena metodom rešetke i metodom pečatnika. Upoređenju različitih vrsta premaza, najniže vrednosti adhezije pokazali su uzorci lakirani NC premazom (3,29 MPa), dok su uzorci lakirani PU i WB premazom pokazali značajno više vrednosti adhezije (6,96 i 7,91 MPa, respektivno). Bajcovanje drveta trešnje vodenim ili nitro bajcem ima pozitivan uticaj na vrednost adhezije NC i PU premaza, dok kod primene WB premaza uticaj bajcovanja na vrednost adhezije nije zabeležen.
AB  - This paper investigates the impact of the staining of cherry wood (Prunus avium L.) on the adhesion value of three most commonly used types of coatings in the wood industry: nitrocellulose (NC), polyurethane (PU) and water-based (WB) coating. Staining was done using two types of stains: water-based and nitro-based stain. Staining of cherry wood led to an increase in surface roughness, expressed by the parameter Ra for 49.1% when the surface was treated with water-based stain, and for 5.1 % when the surface was treated with nitro-based stain. The value of adhesion of coating on the substrate surface was measured by 'cross-cut test' and 'pull-off test'. Comparing different types of coatings, the samples lacquered with NC coating expressed the lowest value of adhesion (3.29 MPa), and the samples that were lacquered with PU coating and WB showed significantly higher adhesion values (6.96 and 7.91 MPa, respectively). Staining of cherry wood with water-based or nitro-based stains had positive impact on the value of adhesion of NC and PU coating, while the effect of staining on the adhesion of WB coating was not observed.
PB  - Inženjersko društvo za koroziju, Beograd
T2  - Zaštita materijala
T1  - Uticaj bajcovanja drveta trešnje (Prunus avium L.) na adheziju premaza
T1  - Impact of the staining of cherry wood (Prunus avium L.) on the adhesion of coating
EP  - 402
IS  - 4
SP  - 396
VL  - 54
UR  - conv_56
ER  - 

@article{
author = "Palija, Tanja and Jaić, Dejan and Jaić, Milan",
year = "2013",
abstract = "U radu je ispitan uticaj bajcovanja drveta trešnje (Prunus avium L.) na vrednosti adhezije tri najčešće korišćene vrste premaza u drvnoj industriji: nitroceluloznog (NC), poliuretanskog (PU) i vodorazredivog (WB) premaza. Bajcovanje je vršeno korišćenjem dve vrste bajca: vodenog i nitro bajca. Bajcovanje drveta trešnje dovelo je do porasta hrapavosti, izraženo preko parametra Ra, za 49,1 % kada je površina tretirana vodenim bajcem, odnosno za 5,1 % kada je površina tretirana nitro bajcem. Vrednost adhezije premaza na površini drveta je merena metodom rešetke i metodom pečatnika. Upoređenju različitih vrsta premaza, najniže vrednosti adhezije pokazali su uzorci lakirani NC premazom (3,29 MPa), dok su uzorci lakirani PU i WB premazom pokazali značajno više vrednosti adhezije (6,96 i 7,91 MPa, respektivno). Bajcovanje drveta trešnje vodenim ili nitro bajcem ima pozitivan uticaj na vrednost adhezije NC i PU premaza, dok kod primene WB premaza uticaj bajcovanja na vrednost adhezije nije zabeležen., This paper investigates the impact of the staining of cherry wood (Prunus avium L.) on the adhesion value of three most commonly used types of coatings in the wood industry: nitrocellulose (NC), polyurethane (PU) and water-based (WB) coating. Staining was done using two types of stains: water-based and nitro-based stain. Staining of cherry wood led to an increase in surface roughness, expressed by the parameter Ra for 49.1% when the surface was treated with water-based stain, and for 5.1 % when the surface was treated with nitro-based stain. The value of adhesion of coating on the substrate surface was measured by 'cross-cut test' and 'pull-off test'. Comparing different types of coatings, the samples lacquered with NC coating expressed the lowest value of adhesion (3.29 MPa), and the samples that were lacquered with PU coating and WB showed significantly higher adhesion values (6.96 and 7.91 MPa, respectively). Staining of cherry wood with water-based or nitro-based stains had positive impact on the value of adhesion of NC and PU coating, while the effect of staining on the adhesion of WB coating was not observed.",
publisher = "Inženjersko društvo za koroziju, Beograd",
journal = "Zaštita materijala",
title = "Uticaj bajcovanja drveta trešnje (Prunus avium L.) na adheziju premaza, Impact of the staining of cherry wood (Prunus avium L.) on the adhesion of coating",
pages = "402-396",
number = "4",
volume = "54",
url = "conv_56"
}

Palija, T., Jaić, D.,& Jaić, M.. (2013). Uticaj bajcovanja drveta trešnje (Prunus avium L.) na adheziju premaza. in Zaštita materijala
Inženjersko društvo za koroziju, Beograd., 54(4), 396-402.
conv_56

Palija T, Jaić D, Jaić M. Uticaj bajcovanja drveta trešnje (Prunus avium L.) na adheziju premaza. in Zaštita materijala. 2013;54(4):396-402.
conv_56 .

Palija, Tanja, Jaić, Dejan, Jaić, Milan, "Uticaj bajcovanja drveta trešnje (Prunus avium L.) na adheziju premaza" in Zaštita materijala, 54, no. 4 (2013):396-402,
conv_56 .

TY  - JOUR
AU  - Jaić, Milan
AU  - Palija, Tanja
PY  - 2012
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/446
AB  - U radu je ispitan uticaj vrste završnog premaza na osnovna mehanička svojstva lakirane površine: utiskujuću tvrdoću, otpornost na grebanje i otpornost na abraziju. Korišćene su tri vrste završnog premaza: 2K poliuretanski premaz, 2K akril-izocijanatni premaz i 2K alkid-uretanski premaz. Da bi se utvrdilo da li drvna vrsta, koja nije u neposrednom kontaktu sa završnim premazom, ima uticaja na mehanička svojstva lakirane površine u ispitivanju su korišćeni uzorci dve drvne vrste: smrče (Picea abies Karst.) i hrasta (Quercus robur L.). Najviše vrednosti utiskujuće tvrdoće pokazali su uzorci lakirani 2K akril-izocijanatnim premazom, kod obe drvne vrste (1,34 N za smrču; 1,4 N za hrast), dok su najviše vrednosti otpornosti na grebanje (20 N kod obe drvne vrste) i otpornosti na abraziju (gubitak mase premaza od 480 mg nakon 700 ciklusa kod obe drvne vrste) pokazali uzorci lakirani 2K alkid-uretanskim premazom. Ispitivanja su pokazala da drvna vrsta nema uticaja na vrednosti utiskujuće tvrdoće, otpornosti na grebanje i otpornosti na abraziju lakirane površine.
AB  - This paper investigates the impact of the top coating on the basic mechanical properties of a lacquered surface, including indentation hardness, scratch resistance and abrasion resistance. Three types of the top coating were used, including a 2K polyurethane coating, a 2K acrylate-isocyanate coating and a 2K alkyd-urethane coating. Samples of two wood species, spruce (Picea abies Karst.) and oak (Quercus robur L.), were used in this study, in order to determine whether the wood species, which is not in direct contact with the top coating, has an impact on the mechanical properties of a lacquered surface. The samples coated with a 2K acrylate-isocyanate coating showed the highest values of indentation hardness, in the samples of both wood species (1.34 N for spruce; 1.4 N for oak). The samples coated with a 2K alkyd-urethane coating showed the highest values of scratch resistance (20 N for both wood species) and abrasion resistance (mass loss of 480 mg after 700 cycles for both wood species). The results have shown that the wood species does not affect the value of indentation hardness, scratch resistance and abrasion resistance of a lacquered surface.
PB  - Univerzitet u Beogradu - Šumarski fakultet, Beograd
T2  - Glasnik Šumarskog fakulteta
T1  - Uticaj završnog premaza na mehanička svojstva lakirane površine drveta
T1  - The impact of the top coating on the mechanical properties of lacquered wood surfaces
EP  - 100
IS  - 106
SP  - 87
DO  - 10.2298/GSF1206087J
UR  - conv_371
ER  - 

@article{
author = "Jaić, Milan and Palija, Tanja",
year = "2012",
abstract = "U radu je ispitan uticaj vrste završnog premaza na osnovna mehanička svojstva lakirane površine: utiskujuću tvrdoću, otpornost na grebanje i otpornost na abraziju. Korišćene su tri vrste završnog premaza: 2K poliuretanski premaz, 2K akril-izocijanatni premaz i 2K alkid-uretanski premaz. Da bi se utvrdilo da li drvna vrsta, koja nije u neposrednom kontaktu sa završnim premazom, ima uticaja na mehanička svojstva lakirane površine u ispitivanju su korišćeni uzorci dve drvne vrste: smrče (Picea abies Karst.) i hrasta (Quercus robur L.). Najviše vrednosti utiskujuće tvrdoće pokazali su uzorci lakirani 2K akril-izocijanatnim premazom, kod obe drvne vrste (1,34 N za smrču; 1,4 N za hrast), dok su najviše vrednosti otpornosti na grebanje (20 N kod obe drvne vrste) i otpornosti na abraziju (gubitak mase premaza od 480 mg nakon 700 ciklusa kod obe drvne vrste) pokazali uzorci lakirani 2K alkid-uretanskim premazom. Ispitivanja su pokazala da drvna vrsta nema uticaja na vrednosti utiskujuće tvrdoće, otpornosti na grebanje i otpornosti na abraziju lakirane površine., This paper investigates the impact of the top coating on the basic mechanical properties of a lacquered surface, including indentation hardness, scratch resistance and abrasion resistance. Three types of the top coating were used, including a 2K polyurethane coating, a 2K acrylate-isocyanate coating and a 2K alkyd-urethane coating. Samples of two wood species, spruce (Picea abies Karst.) and oak (Quercus robur L.), were used in this study, in order to determine whether the wood species, which is not in direct contact with the top coating, has an impact on the mechanical properties of a lacquered surface. The samples coated with a 2K acrylate-isocyanate coating showed the highest values of indentation hardness, in the samples of both wood species (1.34 N for spruce; 1.4 N for oak). The samples coated with a 2K alkyd-urethane coating showed the highest values of scratch resistance (20 N for both wood species) and abrasion resistance (mass loss of 480 mg after 700 cycles for both wood species). The results have shown that the wood species does not affect the value of indentation hardness, scratch resistance and abrasion resistance of a lacquered surface.",
publisher = "Univerzitet u Beogradu - Šumarski fakultet, Beograd",
journal = "Glasnik Šumarskog fakulteta",
title = "Uticaj završnog premaza na mehanička svojstva lakirane površine drveta, The impact of the top coating on the mechanical properties of lacquered wood surfaces",
pages = "100-87",
number = "106",
doi = "10.2298/GSF1206087J",
url = "conv_371"
}

Jaić, M.,& Palija, T.. (2012). Uticaj završnog premaza na mehanička svojstva lakirane površine drveta. in Glasnik Šumarskog fakulteta
Univerzitet u Beogradu - Šumarski fakultet, Beograd.(106), 87-100.
https://doi.org/10.2298/GSF1206087J
conv_371

Jaić M, Palija T. Uticaj završnog premaza na mehanička svojstva lakirane površine drveta. in Glasnik Šumarskog fakulteta. 2012;(106):87-100.
doi:10.2298/GSF1206087J
conv_371 .

Jaić, Milan, Palija, Tanja, "Uticaj završnog premaza na mehanička svojstva lakirane površine drveta" in Glasnik Šumarskog fakulteta, no. 106 (2012):87-100,
https://doi.org/10.2298/GSF1206087J .,
conv_371 .

TY  - JOUR
AU  - Jaić, Milan
AU  - Palija, Tanja
PY  - 2012
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/417
AB  - U radu je ispitivan uticaj drvne vrste i formulacije premaza u završnom sloju na vrednosti adhezije očvrsnulog filma premaza. Uzorci smrče i hrasta lakirani su 2K poliuretanskim premazom u osnovnim sloju, dok su u završnom sloju korišćene tri vrste premaza: 2K poliuretanski, 2K akril-izocijanatni i 2K alkid-uretanski premaz. Merenje adhezije je vršeno metodom rešetke i metodom pečatnika. Lakirani uzorci hrasta pokazali su od 27,41 do 38,98 % više vrednosti adhezije mereno metodom pečatnika, u odnosu na lakirane uzorke smrče. U poređenju različitih vrsta premaza u završnom sloju najviše vrednosti adhezije, mereno metodom pečatnika, pokazali su 2K akril-izocijanatni (3,72 MPa za uzorke smrče i 5,45 MPa za uzorke hrasta) i 2K alkid-uretanski premaz (3,76 MPa za uzorke smrče i 5,49 MPa za uzorke hrasta). Određena odstupanja u oceni adhezije metodom rešetke u odnosu na vrednosti adhezije dobijene metodom pečatnika pokazala su neophodnost primene više metoda u vrednovanju adhezije očvrsnulog filma premaza na površini drveta.
AB  - This paper investigates the impact of wood species and formulation of coating in the top layer to the adhesion of cured coating. The samples of spruce and oak wood were coated with 2K polyurethane coating in the basic layer, while three types of coatings were used in the top layer: 2K polyurethane, 2K acrylic-isocyanate and 2K alkyd-urethane coating. Measurement of adhesion was performed by the cross-cut and pull-off method. The samples of oak wood showed for 27.41 to 38.98% higher values of adhesion measured by pull-off test, compared to the samples of spruce wood. In comparison of different types of coatings in the top layer the highest values of adhesion, measured by pull-off test, showed 2K acrylic-isocyanate coating (3.72 MPa for samples of spruce and 5.45 MPa for samples of oak) and 2K alkyd-urethane coating (3.76 MPa for samples of spruce and 5.49 MPa for samples of oak). Certain disagreement in the assessment of adhesion by cross-cut method compared to the values obtained by pull-off method showed the necessity of applying more than one method for evaluating the adhesion of the cured coating to the wood surface.
PB  - Inženjersko društvo za koroziju, Beograd
T2  - Zaštita materijala
T1  - Uticaj vrste drveta i sistema površinske obrade na adheziju premaza
EP  - 303
IS  - 4
SP  - 299
VL  - 53
UR  - conv_55
ER  - 

@article{
author = "Jaić, Milan and Palija, Tanja",
year = "2012",
abstract = "U radu je ispitivan uticaj drvne vrste i formulacije premaza u završnom sloju na vrednosti adhezije očvrsnulog filma premaza. Uzorci smrče i hrasta lakirani su 2K poliuretanskim premazom u osnovnim sloju, dok su u završnom sloju korišćene tri vrste premaza: 2K poliuretanski, 2K akril-izocijanatni i 2K alkid-uretanski premaz. Merenje adhezije je vršeno metodom rešetke i metodom pečatnika. Lakirani uzorci hrasta pokazali su od 27,41 do 38,98 % više vrednosti adhezije mereno metodom pečatnika, u odnosu na lakirane uzorke smrče. U poređenju različitih vrsta premaza u završnom sloju najviše vrednosti adhezije, mereno metodom pečatnika, pokazali su 2K akril-izocijanatni (3,72 MPa za uzorke smrče i 5,45 MPa za uzorke hrasta) i 2K alkid-uretanski premaz (3,76 MPa za uzorke smrče i 5,49 MPa za uzorke hrasta). Određena odstupanja u oceni adhezije metodom rešetke u odnosu na vrednosti adhezije dobijene metodom pečatnika pokazala su neophodnost primene više metoda u vrednovanju adhezije očvrsnulog filma premaza na površini drveta., This paper investigates the impact of wood species and formulation of coating in the top layer to the adhesion of cured coating. The samples of spruce and oak wood were coated with 2K polyurethane coating in the basic layer, while three types of coatings were used in the top layer: 2K polyurethane, 2K acrylic-isocyanate and 2K alkyd-urethane coating. Measurement of adhesion was performed by the cross-cut and pull-off method. The samples of oak wood showed for 27.41 to 38.98% higher values of adhesion measured by pull-off test, compared to the samples of spruce wood. In comparison of different types of coatings in the top layer the highest values of adhesion, measured by pull-off test, showed 2K acrylic-isocyanate coating (3.72 MPa for samples of spruce and 5.45 MPa for samples of oak) and 2K alkyd-urethane coating (3.76 MPa for samples of spruce and 5.49 MPa for samples of oak). Certain disagreement in the assessment of adhesion by cross-cut method compared to the values obtained by pull-off method showed the necessity of applying more than one method for evaluating the adhesion of the cured coating to the wood surface.",
publisher = "Inženjersko društvo za koroziju, Beograd",
journal = "Zaštita materijala",
title = "Uticaj vrste drveta i sistema površinske obrade na adheziju premaza",
pages = "303-299",
number = "4",
volume = "53",
url = "conv_55"
}

Jaić, M.,& Palija, T.. (2012). Uticaj vrste drveta i sistema površinske obrade na adheziju premaza. in Zaštita materijala
Inženjersko društvo za koroziju, Beograd., 53(4), 299-303.
conv_55

Jaić M, Palija T. Uticaj vrste drveta i sistema površinske obrade na adheziju premaza. in Zaštita materijala. 2012;53(4):299-303.
conv_55 .

Jaić, Milan, Palija, Tanja, "Uticaj vrste drveta i sistema površinske obrade na adheziju premaza" in Zaštita materijala, 53, no. 4 (2012):299-303,
conv_55 .

TY  - JOUR
AU  - Jaić, Milan
AU  - Dobić, Jovan
AU  - Palija, Tanja
PY  - 2010
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/328
AB  - U ovom radu ispitan je uticaj brušenja, operacije bajcovanja i primene poliuretanskog i akrilnog premaza na adheziju, otpornost na grebanje i otpornost na abraziju premaza. Cilj rada je bio određivanje najznačajnijih mehaničkih svojstava lakirane površine, sa stanovišta upotrebe Paulownia elongata i Paulownia fortunei, uz primenu različitih sistema površinske obrade drveta. Za ispitivanje adhezije premaza korišćen je metod rešetke. Obuhvatniji prikaz adhezije premaza dobijen je merenjem otpornosti na grebanje. Otpornost na abraziju je ispitana metodom slobodnog pada abrazivnih čestica. Primenjeni sistem brušenja nije imao uticaja na ispitivana mehanička svojstva. Bajcovani uzorci lakirani PU premazom pokazali su bolju adheziju u odnosu na nebajcovane uzorke. Uticaj bajcovanja na otpornost na grebanje nije utvrđen. Bajcovani uzorci pokazali su veću otpornost na abraziju kod obe drvne vrste. Više vrednosti mehaničkih svojstava pokazali su uzorci lakirani PU premazom u poređenju sa uzorcima lakiranim UV akrilnim premazom. Primena PU premaza za površinsku obradu Paulownia elongata i Paulownia fortunei je adekvatnija od primene UV akrilnog premaza, sa stanovišta otpornosti na grebanje i abraziju.
AB  - This paper presents the research of influence of sanding, staining and the use of polyurethane and acrylic coating on the adhesion, scratch resistance and abrasion resistance of the coating. Objective was to determine the most important mechanical properties of lacquered surfaces, considering the application of Paulownia elongata and Paulownia fortunei, by using different systems of surface finishing. Cross cut method was used for measurement of adhesion. More accurate view of coating adhesion was obtained by measuring the scratch resistance. Abrasion resistance was tested by the method of free falling of abrasive particles. The applied system of sanding had no effect on the examined mechanical properties. Stained samples lacquered with PU coating showed better adhesion to the non-stained samples. Impact of staining on scratch resistance is not established. Stained samples showed greater resistance to abrasion for both wood species. Samples lacquered with PU coating showed the higher values of mechanical properties compared with samples lacquered with UV acrylic coating. Application of PU coating for surface finishing of Paulownia elongata and Paulownia fortunei is more adequate than the application of UV acrylic coatings, from the point of scratch resistance and abrasion resistance.
PB  - Univerzitet u Beogradu - Šumarski fakultet, Beograd
T2  - Glasnik Šumarskog fakulteta
T1  - Uticaj sistema površinske obrade Paulownia Siebold et Zucc. na mehanička svojstva lakirane površine
T1  - The influence of surface finishing of Paulownia Siebold et Zucc. on the mechanical properties of lacquered surface
EP  - 23
IS  - 102
SP  - 7
DO  - 10.2298/GSF1002007J
UR  - conv_323
ER  - 

@article{
author = "Jaić, Milan and Dobić, Jovan and Palija, Tanja",
year = "2010",
abstract = "U ovom radu ispitan je uticaj brušenja, operacije bajcovanja i primene poliuretanskog i akrilnog premaza na adheziju, otpornost na grebanje i otpornost na abraziju premaza. Cilj rada je bio određivanje najznačajnijih mehaničkih svojstava lakirane površine, sa stanovišta upotrebe Paulownia elongata i Paulownia fortunei, uz primenu različitih sistema površinske obrade drveta. Za ispitivanje adhezije premaza korišćen je metod rešetke. Obuhvatniji prikaz adhezije premaza dobijen je merenjem otpornosti na grebanje. Otpornost na abraziju je ispitana metodom slobodnog pada abrazivnih čestica. Primenjeni sistem brušenja nije imao uticaja na ispitivana mehanička svojstva. Bajcovani uzorci lakirani PU premazom pokazali su bolju adheziju u odnosu na nebajcovane uzorke. Uticaj bajcovanja na otpornost na grebanje nije utvrđen. Bajcovani uzorci pokazali su veću otpornost na abraziju kod obe drvne vrste. Više vrednosti mehaničkih svojstava pokazali su uzorci lakirani PU premazom u poređenju sa uzorcima lakiranim UV akrilnim premazom. Primena PU premaza za površinsku obradu Paulownia elongata i Paulownia fortunei je adekvatnija od primene UV akrilnog premaza, sa stanovišta otpornosti na grebanje i abraziju., This paper presents the research of influence of sanding, staining and the use of polyurethane and acrylic coating on the adhesion, scratch resistance and abrasion resistance of the coating. Objective was to determine the most important mechanical properties of lacquered surfaces, considering the application of Paulownia elongata and Paulownia fortunei, by using different systems of surface finishing. Cross cut method was used for measurement of adhesion. More accurate view of coating adhesion was obtained by measuring the scratch resistance. Abrasion resistance was tested by the method of free falling of abrasive particles. The applied system of sanding had no effect on the examined mechanical properties. Stained samples lacquered with PU coating showed better adhesion to the non-stained samples. Impact of staining on scratch resistance is not established. Stained samples showed greater resistance to abrasion for both wood species. Samples lacquered with PU coating showed the higher values of mechanical properties compared with samples lacquered with UV acrylic coating. Application of PU coating for surface finishing of Paulownia elongata and Paulownia fortunei is more adequate than the application of UV acrylic coatings, from the point of scratch resistance and abrasion resistance.",
publisher = "Univerzitet u Beogradu - Šumarski fakultet, Beograd",
journal = "Glasnik Šumarskog fakulteta",
title = "Uticaj sistema površinske obrade Paulownia Siebold et Zucc. na mehanička svojstva lakirane površine, The influence of surface finishing of Paulownia Siebold et Zucc. on the mechanical properties of lacquered surface",
pages = "23-7",
number = "102",
doi = "10.2298/GSF1002007J",
url = "conv_323"
}

Jaić, M., Dobić, J.,& Palija, T.. (2010). Uticaj sistema površinske obrade Paulownia Siebold et Zucc. na mehanička svojstva lakirane površine. in Glasnik Šumarskog fakulteta
Univerzitet u Beogradu - Šumarski fakultet, Beograd.(102), 7-23.
https://doi.org/10.2298/GSF1002007J
conv_323

Jaić M, Dobić J, Palija T. Uticaj sistema površinske obrade Paulownia Siebold et Zucc. na mehanička svojstva lakirane površine. in Glasnik Šumarskog fakulteta. 2010;(102):7-23.
doi:10.2298/GSF1002007J
conv_323 .

Jaić, Milan, Dobić, Jovan, Palija, Tanja, "Uticaj sistema površinske obrade Paulownia Siebold et Zucc. na mehanička svojstva lakirane površine" in Glasnik Šumarskog fakulteta, no. 102 (2010):7-23,
https://doi.org/10.2298/GSF1002007J .,
conv_323 .

TY  - JOUR
AU  - Jaić, Milan
AU  - Palija, Tanja
AU  - Dobić, Jovan
PY  - 2010
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/326
AB  - U ovom radu ispitivan je uticaj pripreme površine podloge na sposobnost kvašenja poliuretanskih lakova metodom kontaktnog ugla. Uzorci su izrađeni od dve vrste paulovnije (Paulownia elongata i Paulownia fortunei). Svi uzorci su obrađeni rendisanjem (glodanjem), posle čega je vršena obrada brušenjem pri čemu su uzorci podeljeni u grupe. Za svaku grupu u odnosu na pravac drvnih vlakana, određen je sistem obrade brušenjem, zasnovan na numeraciji brusnog papira, redosledu smenjivanja brusnih traka različite numeracije i pravcu brušenja. Kvalitet pripreme podloge posle brušenja izražen je preko parametara hrapavosti u sistemu 'M': Ra, Rz, Rv, Rp i Rt. Za merenje kontaktnog ugla korišćen je transparentni poliuretanski (PU) lak i destilovana voda. Vrednosti kontaknog ugla dovedene su u vezu sa sistemom brušenja preko parametra hrapavosti Ra.
AB  - This paper presents the research of influence of wood surface preparation on the wetting ability of polyurethane coatings, by the method of contact angle. The samples were made of two species of Paulownia (Paulownia elongata and Paulownia fortunei). All the samples were processed by planing (molding). After molding, the samples were arranged in groups and sanded. In relation with wood grain direction, each group had a particular system of sanding, based on the numbering of sanding paper, program of displacement of sanding papers with different numbering and the direction of sanding. The quality of wood surface after sanding was expressed by the values of roughness parameters in the system 'M': Ra, Rz, Rv, Rp and Rt. The contact angle was measured using transparent polyurethane (PU) coating and distilled water. The influence of the system of sanding on the values of contact angle was analyzed by roughness parameter Ra.
PB  - Univerzitet u Beogradu - Šumarski fakultet, Beograd
T2  - Glasnik Šumarskog fakulteta
T1  - Uticaj sistema brušenja Paulownia siebold et zucc. na sposobnost kvašenja
T1  - The influence of sanding system on wetting of Paulownia siebold et zucc.
EP  - 80
IS  - 101
SP  - 67
DO  - 10.2298/GSF1001067J
UR  - conv_317
ER  - 

@article{
author = "Jaić, Milan and Palija, Tanja and Dobić, Jovan",
year = "2010",
abstract = "U ovom radu ispitivan je uticaj pripreme površine podloge na sposobnost kvašenja poliuretanskih lakova metodom kontaktnog ugla. Uzorci su izrađeni od dve vrste paulovnije (Paulownia elongata i Paulownia fortunei). Svi uzorci su obrađeni rendisanjem (glodanjem), posle čega je vršena obrada brušenjem pri čemu su uzorci podeljeni u grupe. Za svaku grupu u odnosu na pravac drvnih vlakana, određen je sistem obrade brušenjem, zasnovan na numeraciji brusnog papira, redosledu smenjivanja brusnih traka različite numeracije i pravcu brušenja. Kvalitet pripreme podloge posle brušenja izražen je preko parametara hrapavosti u sistemu 'M': Ra, Rz, Rv, Rp i Rt. Za merenje kontaktnog ugla korišćen je transparentni poliuretanski (PU) lak i destilovana voda. Vrednosti kontaknog ugla dovedene su u vezu sa sistemom brušenja preko parametra hrapavosti Ra., This paper presents the research of influence of wood surface preparation on the wetting ability of polyurethane coatings, by the method of contact angle. The samples were made of two species of Paulownia (Paulownia elongata and Paulownia fortunei). All the samples were processed by planing (molding). After molding, the samples were arranged in groups and sanded. In relation with wood grain direction, each group had a particular system of sanding, based on the numbering of sanding paper, program of displacement of sanding papers with different numbering and the direction of sanding. The quality of wood surface after sanding was expressed by the values of roughness parameters in the system 'M': Ra, Rz, Rv, Rp and Rt. The contact angle was measured using transparent polyurethane (PU) coating and distilled water. The influence of the system of sanding on the values of contact angle was analyzed by roughness parameter Ra.",
publisher = "Univerzitet u Beogradu - Šumarski fakultet, Beograd",
journal = "Glasnik Šumarskog fakulteta",
title = "Uticaj sistema brušenja Paulownia siebold et zucc. na sposobnost kvašenja, The influence of sanding system on wetting of Paulownia siebold et zucc.",
pages = "80-67",
number = "101",
doi = "10.2298/GSF1001067J",
url = "conv_317"
}

Jaić, M., Palija, T.,& Dobić, J.. (2010). Uticaj sistema brušenja Paulownia siebold et zucc. na sposobnost kvašenja. in Glasnik Šumarskog fakulteta
Univerzitet u Beogradu - Šumarski fakultet, Beograd.(101), 67-80.
https://doi.org/10.2298/GSF1001067J
conv_317

Jaić M, Palija T, Dobić J. Uticaj sistema brušenja Paulownia siebold et zucc. na sposobnost kvašenja. in Glasnik Šumarskog fakulteta. 2010;(101):67-80.
doi:10.2298/GSF1001067J
conv_317 .

Jaić, Milan, Palija, Tanja, Dobić, Jovan, "Uticaj sistema brušenja Paulownia siebold et zucc. na sposobnost kvašenja" in Glasnik Šumarskog fakulteta, no. 101 (2010):67-80,
https://doi.org/10.2298/GSF1001067J .,
conv_317 .