TY  - JOUR
AU  - Popović, Ivana
AU  - Rusmirović, Jelena D.
AU  - Rančić, Milica
AU  - Tasić, Ana
AU  - Lazić, Dragana
AU  - Marinković, Aleksandar D.
PY  - 2015
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/686
AB  - U radu je prikazana sinteza visokoefikasnih antikorozivnih premaza dobijenih iz alkidnih smola (AR) baziranih na proizvodima glikolize iz otpadnog poli(etilen tereftalata) (PET). Glikolizati PET-a dobijeni postupkom katalitičke depolimerizacije uz pomoć trimetilolpropana (TMP) i dipropilen glikola (DPG), su korišćeni kao zamena polihidroksilne komponente tokom sinteze AR smola. Sintetisani glikolizati i AR smole okarakterisane su primenom FT-IR i 1HNMR spektroskopije i određena im je vrednost kiselinskog, jodnog i hidroksilnog broja. Sintetisanim AR smolama, kao i antikorozionim alkidnim premazima određena su sledeća svojstva: debljina suvog filma, adhezivnost, bubrenje, korozivnost, prskanje i odslojavanje prema SRPS EN ISO standardima. Alkidne smole su dobijene u visokom prinosu i pokazale su dobra fizičko-mehanička svojstva, adhezivnost i sjaj premaza (≤85 %), dok su antikorozioni alkidni premazi na bazi AR1 i AR3 pokazali najbolje rezultate otpornosti na koroziju. Najefikasnija kombinacija katalizatora sušenja je 0.5 mas.% Ca, 0.03 mas.%, Co i 0.45 mas% Zr.
AB  - Synthesis of high-performance anticorrosive coatings obtained from alkyd resins (ARs) based on waste poly(ethylene terephthalate) (PET) glycolyzates is presented. PET glycolyzates, synthesized by catalytic depolymerization with trimethylolpropane (TMP) and dipropylene glycol (DPG), were used as replacement of part of the polyhydroxylic component during the ARs synthesis. The obtained glycolyzates and ARs were analyzed using FT-IR and 1HNMR spectroscopy and acid, iodine, and hydroxyl value were determined. Thickness, adhesion, swelling, corrosion, spraying and layering of the synthesized ARs, as well as alkyd coating film were determined in accordance with SRPS EN ISO standards. ARs were produced in high yields and FT-IR and 1NMR analysis results confirmed assumed structures. All synthesized ARs show good elasticity, flexibility, adhesion and the gloss values are greater than 85 %, and the alkyd coating films based on AR1 and AR3 showed best corrosion results. The most effective dryer catalyst combination was 0.5 wt.% Ca, 0.03 wt.%, Co and 0.45 wt.% Zr.
PB  - Inženjersko društvo za koroziju, Beograd
T2  - Zaštita materijala
T1  - Sinteza visokoefikasnih alkidnih antikorozionih premaza na bazi poli(etilen tereftalata)
T1  - Synthesis of high-performance alkyd anticorrosion coatings based on waste poly(ethylene terephthalate)
EP  - 491
IS  - 4
SP  - 483
VL  - 56
DO  - 10.5937/ZasMat1504483P
UR  - conv_59
ER  - 

@article{
author = "Popović, Ivana and Rusmirović, Jelena D. and Rančić, Milica and Tasić, Ana and Lazić, Dragana and Marinković, Aleksandar D.",
year = "2015",
abstract = "U radu je prikazana sinteza visokoefikasnih antikorozivnih premaza dobijenih iz alkidnih smola (AR) baziranih na proizvodima glikolize iz otpadnog poli(etilen tereftalata) (PET). Glikolizati PET-a dobijeni postupkom katalitičke depolimerizacije uz pomoć trimetilolpropana (TMP) i dipropilen glikola (DPG), su korišćeni kao zamena polihidroksilne komponente tokom sinteze AR smola. Sintetisani glikolizati i AR smole okarakterisane su primenom FT-IR i 1HNMR spektroskopije i određena im je vrednost kiselinskog, jodnog i hidroksilnog broja. Sintetisanim AR smolama, kao i antikorozionim alkidnim premazima određena su sledeća svojstva: debljina suvog filma, adhezivnost, bubrenje, korozivnost, prskanje i odslojavanje prema SRPS EN ISO standardima. Alkidne smole su dobijene u visokom prinosu i pokazale su dobra fizičko-mehanička svojstva, adhezivnost i sjaj premaza (≤85 %), dok su antikorozioni alkidni premazi na bazi AR1 i AR3 pokazali najbolje rezultate otpornosti na koroziju. Najefikasnija kombinacija katalizatora sušenja je 0.5 mas.% Ca, 0.03 mas.%, Co i 0.45 mas% Zr., Synthesis of high-performance anticorrosive coatings obtained from alkyd resins (ARs) based on waste poly(ethylene terephthalate) (PET) glycolyzates is presented. PET glycolyzates, synthesized by catalytic depolymerization with trimethylolpropane (TMP) and dipropylene glycol (DPG), were used as replacement of part of the polyhydroxylic component during the ARs synthesis. The obtained glycolyzates and ARs were analyzed using FT-IR and 1HNMR spectroscopy and acid, iodine, and hydroxyl value were determined. Thickness, adhesion, swelling, corrosion, spraying and layering of the synthesized ARs, as well as alkyd coating film were determined in accordance with SRPS EN ISO standards. ARs were produced in high yields and FT-IR and 1NMR analysis results confirmed assumed structures. All synthesized ARs show good elasticity, flexibility, adhesion and the gloss values are greater than 85 %, and the alkyd coating films based on AR1 and AR3 showed best corrosion results. The most effective dryer catalyst combination was 0.5 wt.% Ca, 0.03 wt.%, Co and 0.45 wt.% Zr.",
publisher = "Inženjersko društvo za koroziju, Beograd",
journal = "Zaštita materijala",
title = "Sinteza visokoefikasnih alkidnih antikorozionih premaza na bazi poli(etilen tereftalata), Synthesis of high-performance alkyd anticorrosion coatings based on waste poly(ethylene terephthalate)",
pages = "491-483",
number = "4",
volume = "56",
doi = "10.5937/ZasMat1504483P",
url = "conv_59"
}

Popović, I., Rusmirović, J. D., Rančić, M., Tasić, A., Lazić, D.,& Marinković, A. D.. (2015). Sinteza visokoefikasnih alkidnih antikorozionih premaza na bazi poli(etilen tereftalata). in Zaštita materijala
Inženjersko društvo za koroziju, Beograd., 56(4), 483-491.
https://doi.org/10.5937/ZasMat1504483P
conv_59

Popović I, Rusmirović JD, Rančić M, Tasić A, Lazić D, Marinković AD. Sinteza visokoefikasnih alkidnih antikorozionih premaza na bazi poli(etilen tereftalata). in Zaštita materijala. 2015;56(4):483-491.
doi:10.5937/ZasMat1504483P
conv_59 .

Popović, Ivana, Rusmirović, Jelena D., Rančić, Milica, Tasić, Ana, Lazić, Dragana, Marinković, Aleksandar D., "Sinteza visokoefikasnih alkidnih antikorozionih premaza na bazi poli(etilen tereftalata)" in Zaštita materijala, 56, no. 4 (2015):483-491,
https://doi.org/10.5937/ZasMat1504483P .,
conv_59 .