TY  - JOUR
AU  - Porankiewicz, Boleslaw
AU  - Wieczorek, Daria
AU  - Đurković, Marija
AU  - Idzikowski, Ireneusz
AU  - Wegrzyn, Zbigniew
PY  - 2021
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/1246
AB  - This article presents an attempt to estimate the nonlinear, multivariable dependence between the main (tangential) cutting force (F-C) and the processing parameters and moduli of elasticity of oak wood (Quercus robur) during peripheral milling with a straight edge. The analysis indicated that the tangential force (F-C) was affected by cutting depth (c(D)), feed rate per tooth (f(Z)), rake angle (gamma(F)), elastic modulus by stretching along the grain (E-SA), elastic modulus by stretching perpendicular to the grain (E-SP), elastic modulus by compression along the grain (E-CA), and the elastic modulus by compression perpendicular to the grain (E-CP). It was found that the elastic moduli (E-SA, E-SP, E-CA, E-CP) very well described the mechanical properties of processed wood. Several interactions between the examined parameters (namely, E-SA.gamma(F), E-SP.gamma(F), E-CP.gamma(F), f(Z.)gamma(F), and f(Z).c(D)) were confirmed in the developed relationship F-C = f(E-SA, E-SP, E-CA, E-CP, f(Z), c(D),gamma(F)).
T2  - BioResources
T1  - Modelling Cutting Forces using the Moduli of Elasticity in Oak Peripheral Milling
EP  - 1437
IS  - 1
SP  - 1424
VL  - 16
DO  - 10.15376/biores.16.1.1424-1437
UR  - conv_1537
ER  - 

@article{
author = "Porankiewicz, Boleslaw and Wieczorek, Daria and Đurković, Marija and Idzikowski, Ireneusz and Wegrzyn, Zbigniew",
year = "2021",
abstract = "This article presents an attempt to estimate the nonlinear, multivariable dependence between the main (tangential) cutting force (F-C) and the processing parameters and moduli of elasticity of oak wood (Quercus robur) during peripheral milling with a straight edge. The analysis indicated that the tangential force (F-C) was affected by cutting depth (c(D)), feed rate per tooth (f(Z)), rake angle (gamma(F)), elastic modulus by stretching along the grain (E-SA), elastic modulus by stretching perpendicular to the grain (E-SP), elastic modulus by compression along the grain (E-CA), and the elastic modulus by compression perpendicular to the grain (E-CP). It was found that the elastic moduli (E-SA, E-SP, E-CA, E-CP) very well described the mechanical properties of processed wood. Several interactions between the examined parameters (namely, E-SA.gamma(F), E-SP.gamma(F), E-CP.gamma(F), f(Z.)gamma(F), and f(Z).c(D)) were confirmed in the developed relationship F-C = f(E-SA, E-SP, E-CA, E-CP, f(Z), c(D),gamma(F)).",
journal = "BioResources",
title = "Modelling Cutting Forces using the Moduli of Elasticity in Oak Peripheral Milling",
pages = "1437-1424",
number = "1",
volume = "16",
doi = "10.15376/biores.16.1.1424-1437",
url = "conv_1537"
}

Porankiewicz, B., Wieczorek, D., Đurković, M., Idzikowski, I.,& Wegrzyn, Z.. (2021). Modelling Cutting Forces using the Moduli of Elasticity in Oak Peripheral Milling. in BioResources, 16(1), 1424-1437.
https://doi.org/10.15376/biores.16.1.1424-1437
conv_1537

Porankiewicz B, Wieczorek D, Đurković M, Idzikowski I, Wegrzyn Z. Modelling Cutting Forces using the Moduli of Elasticity in Oak Peripheral Milling. in BioResources. 2021;16(1):1424-1437.
doi:10.15376/biores.16.1.1424-1437
conv_1537 .

Porankiewicz, Boleslaw, Wieczorek, Daria, Đurković, Marija, Idzikowski, Ireneusz, Wegrzyn, Zbigniew, "Modelling Cutting Forces using the Moduli of Elasticity in Oak Peripheral Milling" in BioResources, 16, no. 1 (2021):1424-1437,
https://doi.org/10.15376/biores.16.1.1424-1437 .,
conv_1537 .

TY  - JOUR
AU  - Đurković, Marija
AU  - Porankiewicz, Boleslaw
AU  - Danon, Gradimir
PY  - 2015
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/720
AB  - An attempt was made to evaluate the non-linear, multi-variable dependency between the main (tangential) force, F-C, and machining parameters and properties of pedunculate oak (Quercus robur) during straight edge, peripheral milling. The tangential force, F-C, was found to be influenced by the feed rate per tooth, f(Z), cutting depth, c(D), rake angle gamma(F), Brinell hardness, H, bending strength, R-B, and modulus of longitudinal elasticity, E. Several interactions between machining parameters and properties of wood were confirmed in the developed relationship F-C = f(f(Z), c(D), gamma(F), H, R-B, E).
PB  - North Carolina State University
T2  - BioResources
T1  - An Attempt at Modelling of Cutting Forces in Oak Peripheral Milling
EP  - 5488
IS  - 3
SP  - 5476
VL  - 10
DO  - 10.15376/biores.10.3.5476-5488
UR  - conv_2134
ER  - 

@article{
author = "Đurković, Marija and Porankiewicz, Boleslaw and Danon, Gradimir",
year = "2015",
abstract = "An attempt was made to evaluate the non-linear, multi-variable dependency between the main (tangential) force, F-C, and machining parameters and properties of pedunculate oak (Quercus robur) during straight edge, peripheral milling. The tangential force, F-C, was found to be influenced by the feed rate per tooth, f(Z), cutting depth, c(D), rake angle gamma(F), Brinell hardness, H, bending strength, R-B, and modulus of longitudinal elasticity, E. Several interactions between machining parameters and properties of wood were confirmed in the developed relationship F-C = f(f(Z), c(D), gamma(F), H, R-B, E).",
publisher = "North Carolina State University",
journal = "BioResources",
title = "An Attempt at Modelling of Cutting Forces in Oak Peripheral Milling",
pages = "5488-5476",
number = "3",
volume = "10",
doi = "10.15376/biores.10.3.5476-5488",
url = "conv_2134"
}

Đurković, M., Porankiewicz, B.,& Danon, G.. (2015). An Attempt at Modelling of Cutting Forces in Oak Peripheral Milling. in BioResources
North Carolina State University., 10(3), 5476-5488.
https://doi.org/10.15376/biores.10.3.5476-5488
conv_2134

Đurković M, Porankiewicz B, Danon G. An Attempt at Modelling of Cutting Forces in Oak Peripheral Milling. in BioResources. 2015;10(3):5476-5488.
doi:10.15376/biores.10.3.5476-5488
conv_2134 .

Đurković, Marija, Porankiewicz, Boleslaw, Danon, Gradimir, "An Attempt at Modelling of Cutting Forces in Oak Peripheral Milling" in BioResources, 10, no. 3 (2015):5476-5488,
https://doi.org/10.15376/biores.10.3.5476-5488 .,
conv_2134 .