TY  - JOUR
AU  - Jevtić, Ivana
AU  - Mladenović, Goran
AU  - Milovanović, Aleksa
AU  - Trajković, Isaak
AU  - Đurković, Marija
AU  - Korolija, Nenad
AU  - Milošević, Miloš
PY  - 2024
UR  - https://omorika.sfb.bg.ac.rs/handle/123456789/1519
AB  - This article aims to investigate the mechanical characteristics of specimens fabricated using Selective Laser Sintering technology. The research covers flexural specimens, produced by PA12 materials. CAD model dimensions were selected according to the ISO 178 standard, and the chosen specimen geometry is 96 x 8 x 4 [mm] in bulk. All specimens were produced using a specialized machine Fuse 1 (FormLabs, Summerville, MA). Four specimen batches were produced, each with a different printing orientation (i.e. vertical and horizontal) and location on the printing plate (i.e. in the middle and on the edge of the powder bed). The specimens are tested using a Shimadzu universal machine for testing the mechanical characteristics of materials, AGS-X 100 kN, with a unique additional tool for testing 3-point bending specimens.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - The Influence of Printing Orientation on the Flexural Strength of PA 12 Specimens Produced by SLS
EP  - 57
IS  - 1
SP  - 45
VL  - 56
DO  - 10.2298/SOS230508031J
UR  - conv_1785
ER  - 

@article{
author = "Jevtić, Ivana and Mladenović, Goran and Milovanović, Aleksa and Trajković, Isaak and Đurković, Marija and Korolija, Nenad and Milošević, Miloš",
year = "2024",
abstract = "This article aims to investigate the mechanical characteristics of specimens fabricated using Selective Laser Sintering technology. The research covers flexural specimens, produced by PA12 materials. CAD model dimensions were selected according to the ISO 178 standard, and the chosen specimen geometry is 96 x 8 x 4 [mm] in bulk. All specimens were produced using a specialized machine Fuse 1 (FormLabs, Summerville, MA). Four specimen batches were produced, each with a different printing orientation (i.e. vertical and horizontal) and location on the printing plate (i.e. in the middle and on the edge of the powder bed). The specimens are tested using a Shimadzu universal machine for testing the mechanical characteristics of materials, AGS-X 100 kN, with a unique additional tool for testing 3-point bending specimens.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "The Influence of Printing Orientation on the Flexural Strength of PA 12 Specimens Produced by SLS",
pages = "57-45",
number = "1",
volume = "56",
doi = "10.2298/SOS230508031J",
url = "conv_1785"
}

Jevtić, I., Mladenović, G., Milovanović, A., Trajković, I., Đurković, M., Korolija, N.,& Milošević, M.. (2024). The Influence of Printing Orientation on the Flexural Strength of PA 12 Specimens Produced by SLS. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 56(1), 45-57.
https://doi.org/10.2298/SOS230508031J
conv_1785

Jevtić I, Mladenović G, Milovanović A, Trajković I, Đurković M, Korolija N, Milošević M. The Influence of Printing Orientation on the Flexural Strength of PA 12 Specimens Produced by SLS. in Science of Sintering. 2024;56(1):45-57.
doi:10.2298/SOS230508031J
conv_1785 .

Jevtić, Ivana, Mladenović, Goran, Milovanović, Aleksa, Trajković, Isaak, Đurković, Marija, Korolija, Nenad, Milošević, Miloš, "The Influence of Printing Orientation on the Flexural Strength of PA 12 Specimens Produced by SLS" in Science of Sintering, 56, no. 1 (2024):45-57,
https://doi.org/10.2298/SOS230508031J .,
conv_1785 .