U radu su prikazani rezultati istraživanja efekata rada na poslovima usitnjavanja šumskog ostatka traktorom Same Iron 210 DCR sa mulčerom LIPA-AHWI 600, u zasadima topola na području Vojvodine. Usitnjavanje šumskog ostatka kao i uklanjanje žbunaste vegetacije izvršeno je u različitim uslovima rada. Snimano je vreme usitnjavanja šumskog ostatka sakupljenog u gomile, kao i usitnjavanje šumskog ostatka rasutog po sečini. Pored toga, izvršeno je snimanje rada na poslovima uklanjanja žbunaste vegetacije koristeći različite načine rada, mehanizovani-mulčerom LIPA-AHWI 600 sa zahvatom 2,25 m, polumehanizovani-motornom testerom i manuelni načina rada, a zatim izvršena analiza i poređenje rezultata istraživanja. Snimanje je izvršeno na oglednim površinama na području ŠU 'Plavna'. U ovim istraživanjima primenjen je metod fotohronometraže i pritočni metodom merenja vremena. Rezultati dobijeni u ovim istraživanjima prikazuju strukturu utrošenih vremena, ostvarene učinke, dnevne i jedinične troškov...e rada. Na bazi rezultata izvršenih analiza i njihovog poređenja, proizilazi da su efekti rada na usitnjavanju grupisanog šumskog ostatka znatno veći, ali je učešće fizčkog rada znatno zastupljeno. Takođe, efekti rada na uklanjanju žbunaste vegetacije su veći kada se primenjuje mehanizovani način rada, posmatrano sa ekonomskog, ekološkog i ergonomskog aspekta.
Presented in this scientific paper are the results of a study on work effects during chipping forest residue using tractor Same Iron 210 DCR equipped with a mulcher LIPA -AHWI 600 in poplar plantations in Vojvodina region. Chipping of forest residue and removal of brush vegetation has been done in a variety of conditions. Time that was recorded was the time needed to chip the residue that has been piled up, and time needed to chip forest residue that was scattered on the felling site. Besides that, time on jobs of removing the brush vegetation using different methods, mechanized- using mulcher LIPA -AHWI 600with a 2,25m span, semi-mechanizedusing chainsaw and manually, was recorded upon which the analysis and the comparison of the results had been done. Recording had taken place on experimental areas within the territory of SU 'Plavna'. Method of photo-chronometry has been used in this study along with the method of tributary time measuring. Results acquired by this study show the stru...cture of spent time, accomplished efficiency, daily and unit costs of labor. On the basis of the results of the carried out analysis and their comparison, it results that the effects of labor on chipping of piled up residue are significantly higher, but the participation of physical labor is significantly present. Also, effects of work on removal of brush vegetation are higher when mechanized method is implemented, observed from economic, ecologic and ergonomic aspect.
TY - JOUR
AU - Danilović, Milorad
AU - Grbić, Jovica
AU - Mešanović, Zoran
PY - 2009
UR - https://omorika.sfb.bg.ac.rs/handle/123456789/259
AB - U radu su prikazani rezultati istraživanja efekata rada na poslovima usitnjavanja šumskog ostatka traktorom Same Iron 210 DCR sa mulčerom LIPA-AHWI 600, u zasadima topola na području Vojvodine. Usitnjavanje šumskog ostatka kao i uklanjanje žbunaste vegetacije izvršeno je u različitim uslovima rada. Snimano je vreme usitnjavanja šumskog ostatka sakupljenog u gomile, kao i usitnjavanje šumskog ostatka rasutog po sečini. Pored toga, izvršeno je snimanje rada na poslovima uklanjanja žbunaste vegetacije koristeći različite načine rada, mehanizovani-mulčerom LIPA-AHWI 600 sa zahvatom 2,25 m, polumehanizovani-motornom testerom i manuelni načina rada, a zatim izvršena analiza i poređenje rezultata istraživanja. Snimanje je izvršeno na oglednim površinama na području ŠU 'Plavna'. U ovim istraživanjima primenjen je metod fotohronometraže i pritočni metodom merenja vremena. Rezultati dobijeni u ovim istraživanjima prikazuju strukturu utrošenih vremena, ostvarene učinke, dnevne i jedinične troškove rada. Na bazi rezultata izvršenih analiza i njihovog poređenja, proizilazi da su efekti rada na usitnjavanju grupisanog šumskog ostatka znatno veći, ali je učešće fizčkog rada znatno zastupljeno. Takođe, efekti rada na uklanjanju žbunaste vegetacije su veći kada se primenjuje mehanizovani način rada, posmatrano sa ekonomskog, ekološkog i ergonomskog aspekta.
AB - Presented in this scientific paper are the results of a study on work effects during chipping forest residue using tractor Same Iron 210 DCR equipped with a mulcher LIPA -AHWI 600 in poplar plantations in Vojvodina region. Chipping of forest residue and removal of brush vegetation has been done in a variety of conditions. Time that was recorded was the time needed to chip the residue that has been piled up, and time needed to chip forest residue that was scattered on the felling site. Besides that, time on jobs of removing the brush vegetation using different methods, mechanized- using mulcher LIPA -AHWI 600with a 2,25m span, semi-mechanizedusing chainsaw and manually, was recorded upon which the analysis and the comparison of the results had been done. Recording had taken place on experimental areas within the territory of SU 'Plavna'. Method of photo-chronometry has been used in this study along with the method of tributary time measuring. Results acquired by this study show the structure of spent time, accomplished efficiency, daily and unit costs of labor. On the basis of the results of the carried out analysis and their comparison, it results that the effects of labor on chipping of piled up residue are significantly higher, but the participation of physical labor is significantly present. Also, effects of work on removal of brush vegetation are higher when mechanized method is implemented, observed from economic, ecologic and ergonomic aspect.
PB - Univerzitet u Beogradu - Poljoprivredni fakultet - Institut za poljoprivrednu tehniku, Beograd
T2 - Poljoprivredna tehnika
T1 - Usitnjavanje šumskog ostatka u zasadima mekih lišćara traktorom Same Iron 210 DCR sa mulčerom LIPA-AHWI 600
T1 - Chipping the forest residue in softwood deciduous trees plantations using tractor Same Iron 210 DCR equipped with mulcher LIPA-AHWI 600
EP - 111
IS - 3
SP - 101
VL - 34
UR - conv_683
ER -
@article{
author = "Danilović, Milorad and Grbić, Jovica and Mešanović, Zoran",
year = "2009",
abstract = "U radu su prikazani rezultati istraživanja efekata rada na poslovima usitnjavanja šumskog ostatka traktorom Same Iron 210 DCR sa mulčerom LIPA-AHWI 600, u zasadima topola na području Vojvodine. Usitnjavanje šumskog ostatka kao i uklanjanje žbunaste vegetacije izvršeno je u različitim uslovima rada. Snimano je vreme usitnjavanja šumskog ostatka sakupljenog u gomile, kao i usitnjavanje šumskog ostatka rasutog po sečini. Pored toga, izvršeno je snimanje rada na poslovima uklanjanja žbunaste vegetacije koristeći različite načine rada, mehanizovani-mulčerom LIPA-AHWI 600 sa zahvatom 2,25 m, polumehanizovani-motornom testerom i manuelni načina rada, a zatim izvršena analiza i poređenje rezultata istraživanja. Snimanje je izvršeno na oglednim površinama na području ŠU 'Plavna'. U ovim istraživanjima primenjen je metod fotohronometraže i pritočni metodom merenja vremena. Rezultati dobijeni u ovim istraživanjima prikazuju strukturu utrošenih vremena, ostvarene učinke, dnevne i jedinične troškove rada. Na bazi rezultata izvršenih analiza i njihovog poređenja, proizilazi da su efekti rada na usitnjavanju grupisanog šumskog ostatka znatno veći, ali je učešće fizčkog rada znatno zastupljeno. Takođe, efekti rada na uklanjanju žbunaste vegetacije su veći kada se primenjuje mehanizovani način rada, posmatrano sa ekonomskog, ekološkog i ergonomskog aspekta., Presented in this scientific paper are the results of a study on work effects during chipping forest residue using tractor Same Iron 210 DCR equipped with a mulcher LIPA -AHWI 600 in poplar plantations in Vojvodina region. Chipping of forest residue and removal of brush vegetation has been done in a variety of conditions. Time that was recorded was the time needed to chip the residue that has been piled up, and time needed to chip forest residue that was scattered on the felling site. Besides that, time on jobs of removing the brush vegetation using different methods, mechanized- using mulcher LIPA -AHWI 600with a 2,25m span, semi-mechanizedusing chainsaw and manually, was recorded upon which the analysis and the comparison of the results had been done. Recording had taken place on experimental areas within the territory of SU 'Plavna'. Method of photo-chronometry has been used in this study along with the method of tributary time measuring. Results acquired by this study show the structure of spent time, accomplished efficiency, daily and unit costs of labor. On the basis of the results of the carried out analysis and their comparison, it results that the effects of labor on chipping of piled up residue are significantly higher, but the participation of physical labor is significantly present. Also, effects of work on removal of brush vegetation are higher when mechanized method is implemented, observed from economic, ecologic and ergonomic aspect.",
publisher = "Univerzitet u Beogradu - Poljoprivredni fakultet - Institut za poljoprivrednu tehniku, Beograd",
journal = "Poljoprivredna tehnika",
title = "Usitnjavanje šumskog ostatka u zasadima mekih lišćara traktorom Same Iron 210 DCR sa mulčerom LIPA-AHWI 600, Chipping the forest residue in softwood deciduous trees plantations using tractor Same Iron 210 DCR equipped with mulcher LIPA-AHWI 600",
pages = "111-101",
number = "3",
volume = "34",
url = "conv_683"
}
Danilović, M., Grbić, J.,& Mešanović, Z.. (2009). Usitnjavanje šumskog ostatka u zasadima mekih lišćara traktorom Same Iron 210 DCR sa mulčerom LIPA-AHWI 600. in Poljoprivredna tehnika
Univerzitet u Beogradu - Poljoprivredni fakultet - Institut za poljoprivrednu tehniku, Beograd., 34(3), 101-111.
conv_683
Danilović M, Grbić J, Mešanović Z. Usitnjavanje šumskog ostatka u zasadima mekih lišćara traktorom Same Iron 210 DCR sa mulčerom LIPA-AHWI 600. in Poljoprivredna tehnika. 2009;34(3):101-111.
conv_683 .
Danilović, Milorad, Grbić, Jovica, Mešanović, Zoran, "Usitnjavanje šumskog ostatka u zasadima mekih lišćara traktorom Same Iron 210 DCR sa mulčerom LIPA-AHWI 600" in Poljoprivredna tehnika, 34, no. 3 (2009):101-111,
conv_683 .
